Table of Contents
Advertisement
These settings are needed to use the picture messages function. The
settings for picture messages is supplied by your service provider and
can be sent to you automatically.
•
New connection: Follow the steps below if your service provider
is not in the list. Contact your service provider for correct settings.
•
Name to add account name.
•
Username to add user name.
•
Password to add password.
•
Access point to add APN (Access Point Name).
Auth type to specify the type of authentication to be used if
•
your service provider has an APN with user name and
password.
IP type to specify the protocol which the device must use to
•
access the Internet, through cellular data.
Gateway to add a gateway proxy address.
•
Port to add gateway proxy port.
•
Homepage to add homepage.
•
Advanced settings for more advanced settings:
•
•
•
Press Save when done.
•
Search to search all available MMS accounts (APN).
•
Delete to delete the selected MMS account (APN).
•
Edit to edit the selected MMS account (APN).
•
4.
Check/uncheck/select the functions as wanted.
•
Delivery report to be notified when your multimedia message
has reached the recipient.
Request read report to be notified when your multimedia mes-
•
sage has been read by the recipient.
File storage select to save multimedia files on Phone or Memo-
•
ryCard (if installed).
•
Memory status to display the memory space used on the se-
lected memory.
English
DNS address to add a DNS IP address for your service
provider.
Network type to set the network type. Select between
WAP and HTTP.
24
Advertisement
Table of Contents
