Table of Contents
Advertisement
How to set detergent type: powder/gel/tablet (if option is available)
In order to always ensure the best cleaning
results, you NEED to set:
DETERGENT type and WATER HARDNESS.
1- salt reservoir
2- rinse aid dispenser
3- detergent dispenser
4- racks system
5,6,7,8- available functions on the panel
9- filters
10- spray arms
1. Select 3rd programme
2. Press START button
(see Table of programmes
for 7 seconds
- page 1)
For models without "detergent type" option, the salt and rinse aid indicators will be lit when tablets are used.
How to set water hardness
* only before the first wash or if the
water hardness has been changed
1. Ask your water supply company what
2. ...enter this value on your dishwasher
the water hardness is...
Dishwasher with
English
Water
display: insert value
degrees °eH
hardness
in the display
0 - 6.3
Soft
7 - 12.6
Medium
13.3 - 18.9
Average
19.6 - 25.9
Medium-hard
26.6 - 35
Hard
35.7 - 44.1
Very hard
44.8 - 74.9
Extremely hard
3a. Check your
3b....and set it on your dishwasher
detergent type...
using the START button
(as per table below)
Dishwasher models
Detergent
model without
types
model with display
display
Powder or gel
3h 6h 9h
(factory setting)
Tablet 2 in 1
Tablet 3 in 1
Tablet All in 1
Switch on the appliance
- Select the 2nd programme "P2" - consult the table of programmes.
- Press the START button for at least 5 seconds until the START indicator lamp flashes.
- The water hardness setting is shown on the display (if present) or the START button flashes.
- With each successive touch of the START button the setting increases and when it reaches 7 it returns to 1 again.
- The appliance must be switched off to memorise the new setting.
Suggestions for detergent use
Dishwasher without
display: count
Gel or Powder
START button led
(rinse aid and salt)
flashes
1
1x
2
2x
3
3x
go to step 1
4
4x
(see "Daily check")
5
5x
6
6x
7
7x
4. Remember to use salt and rinse
aid when needed (as indicated
below)
no symbol
add salt
add rinse aid
rinse aid
add salt
salt
rinse aid
Tablets
Water hardness level is factory set for
medium hard water (a number "4" is
shown on the display or the START
indicator lamp flashes 4 times).
if extra salt is
Even if you use tablets which include salt,
needed go to step 1
you must still add salt since such
(see "Daily check")
detergents are not effective enough at
softening hard water.
First time use
5. Switch off and switch on
again to save setting
GB -2-
Hide quick links:
Advertisement
Table of Contents
