Toro Recycler 20112 Operator's Manual page 6

2. Filling the Engine with Oil
Procedure
Your mower does not come with oil in the engine, but it
does come with a bottle of oil.
1. Remove the dipstick (Figure 6).
2. Slowly pour oil into the oil fill tube until the oil level
reaches the Full line on the dipstick (Figure 6). Do
Figure 5
Figure 6
not overfill. (Max. fill: 20 oz. (0.59 l), type: SAE
30W detergent oil with an API service classification
of SF, SG, SH, SJ, SL, or higher.)
3. Install the dipstick securely.
Important: Change the engine oil after the first
5 operating hours
Refer to Changing the Engine Oil.
3. Installing the Fuse
Procedure
Electric-start models only
Your mower comes with a 40-amp fuse that protects the
electric starter.
Important: You cannot start the mower with the
electric starter or charge the battery unless you
install the fuse.
1. Unclip both ends of the battery cover and remove it
(Figure 7).
2. Insert the fuse into the fuse holder (Figure 8).
Note: Your mower comes with a fuse in the owner's
packet and another fuse in the battery box.
3. Install the battery cover.
6
; change it yearly thereafter.
Figure 7
Figure 8