Panasonic KX-FT72BR-G Service Manual page 77

2.4.4. SERVICE FUNCTION TABLE
Code Function
501 Setting the pause time
502 Setting the flash recall time 01~99 X 10 msec
503 Setting the pulse dial
speed
520 Setting the CED frequency 1:2100Hz 2:1100Hz
521 Setting the international
line mode
522 Auto standby select
523 Receive equalizer select
524 SND EQL.
531 Release PIN code for DIAL
LOCK
544 Selecting the document
feed position
550 Memory clear
551 ROM version and sum check
553 Setting the FAX monitor
function
554 Modem test
555 Scanner test
556 Motor test
557 LED test
558 LCD test
559 Setting the document jam
detection
561 KEY test
570 Setting the % break
571 Setting the number of
times that ITS is redialed
572 Setting the ITS redial
interval
573 Setting of number of rings
for REMOTE TURN ON
590 Setting the number of FAX
redial times
591 Setting the FAX redial
interval
592 Designation of CNG
sending
593 Setting the interval
between CED and the 300
bps signal
594 Setting the overseas DIS
detection
Set Value Effective Range
001~600 X 100 msec 001~600
01~99
1:10pps 2:20pps 1, 2
1, 2
1:ON 2:OFF 1, 2
1:ON 2:OFF 1, 2
1:ON 2:OFF 1,2
1:ON 2:OFF 1,2
1:ON 2:YES 1,2
01~99 step 00~99
1: OFF 2:PHASE B 1, 2, 3
3:ALL
1:ON 2:OFF 1, 2
1:61% 2:67% 1, 2
00~99 00~99
001~999 sec 001~999
01~99 01~99
00~99 00~99
001~999 sec 001~999
1: OFF 2:ALL 3:AUTO 1, 2, 3
1: 75 msec 2:500 1, 2, 3
msec 3:1000 msec
1: Detects on the 1st 1, 2
time.2: Detects on the
2nd time.
Default
050 Selects the pause time in 100 msec steps.
70 Selects the line break time during flashing in 10
msec steps.
1 Sets the pulse dial speed.
1 When international communications cannot be
performed smoothly select 1100Hz. However
some
accopted (1100Hz on CED). (See "5. Unit can
copy, but cannot transmit/receive long distance
or
DEFECTIVE FACSIMILE SECTION (P.36).)
1 Selects the international line mode during FAX
communication. (See "5. Unit can copy, but
cannot
international communications" in DEFECTIVE
FACSIMILE SECTION (P.36).)
1 Set the resolution and contrast conditions for
FAX or copy to the default settings.
2 When the telephone station is far from the unit
or reception cannot be performed correctly,
adjust accordingly.
2 When the telephone station is far from the unit
or reception cannot be performed correctly,
adjust accordingly.
1 When you want to velease the PIN code for dial
lock, press the "2" key. Then the setting value
returns to the default.
50 When the ADF function is incorrect, adjust the
feed position. (8 step = 1mm)
Press "START/COPY/SET".
Press "START/COPY/SET".
1 Sets whether to monitor the line signal with the
unit´s speaker during FAX communication or
not.
Press "START/COPY/SET".
Press "START/COPY/SET".
Press "START/COPY/SET".
Press "START/COPY/SET".
Press "START/COPY/SET".
1 Selects the jam detection of a document during
FAX transmission/copying.
Press any key.
2 Sets the % break of pulse dialing.
5 times Selects the number of times that ITS is redialed
(not including the first dial).
065 sec Sets the interval of ITS redialing.
10 times Sets the number of rings before the unit starts
to receive a document in the TEL mode.
05 times Selects the number of redial times during FAX
communication (not including the first dial).
065 sec Sets the FAX redial interval during FAX
communication.
2 Lets you select the CNG output during FAX
transmission. ALL: CNG is output at phase A.
AUTO: CNG is output only when automatic
dialing is performed. OFF: CNG is not output at
phase A.
1 Sets the interval between the CED signal and
subsequent 300 bps signal. (See "5. Unit can
copy, but cannot transmit/receive long distance
or
DEFECTIVE FACSIMILE SECTION (P.36).)
1 Sets the recognition format of the DIS signal.
1:Detects the first DIS signal sent from the
receiver during FAX transmission. 2:Ignores
the first DIS signal sent from the receiver during
FAX transmission. (See "5. Unit can copy, but
cannot
international communications" in DEFECTIVE
FACSIMILE SECTION (P.36).)
77
Remarks
exchange system should
international communications"
transmit/receive long distance
international communications"
transmit/receive long distance
KX-FT72BR-G
not be
in
or
in
or