1. Manuals
  2. Brands
  3. Lenovo Manuals
  4. Laptop
  5. V480
  6. Hardware maintenance manual

Lenovo V480 Hardware Maintenance Manual

Hide thumbs Also See for V480:
Table of Contents

Advertisement

Quick Links

Download this manual See also: Hardware Maintenance Manual, User Manual
Hardware Maintenance Manual
Lenovo V480

Advertisement

Table of Contents
loading

Related Manuals for Lenovo V480

Summary of Contents for Lenovo V480

  • Page 1 Hardware Maintenance Manual Lenovo V480...
  • Page 2 Appendix A “Notices” on page 93. First Edition (March 2012) © Copyright Lenovo 2012. LIMITED AND RESTRICTED RIGHTS NOTICE: If data or software is delivered pursuant a General Services Administration “GSA” contract, use, reproduction, or disclosure is subject to restrictions set forth in Contract No. GS-35F-05925.

  • Page 3: Table Of Contents

    ... Chapter 5. Lenovo V480 ..37 Specifications ....
  • Page 4 Hardware Maintenance Manual...

  • Page 5: About This Manual

    • The product-specific section includes service, reference, and product-specific parts information. Important: • This manual is intended only for trained service technicians who are familiar with Lenovo products. Use this manual to troubleshoot problems effectively. • Before servicing a Lenovo product, be sure to read all the information under Chapter 1 “Safety information”...
  • Page 6 Hardware Maintenance Manual...

  • Page 7: Chapter 1. Safety Information

    • Reinstall all covers correctly before returning the machine to the customer. • Fan louvers on the machine help to prevent overheating of internal components. Do not obstruct fan louvers or cover them with labels or stickers. © Copyright Lenovo 2012...

  • Page 8: Electrical Safety

    Electrical safety Observe the following rules when working on electrical equipment. Important: Use only approved tools and test equipment. Some hand tools have handles covered with a soft material that does not insulate you when working with live electrical currents. Many customers have, near their equipment, rubber floor mats that contain small conductive fibers to decrease electrostatic discharges.

  • Page 9: Safety Inspection Guide

    4. Check for cracked or bulging batteries. 5. Remove the cover. 6. Check for any obvious non-Lenovo alterations. Use good judgment as to the safety of any non-Lenovo alterations. 7. Check inside the unit for any obvious unsafe conditions, such as metal filings, contamination, water or other liquids, or signs of fire or smoke damage.

  • Page 10: Grounding Requirements

    2. Make sure that the ESD protective devices you use have been certified (ISO 9000) as fully effective. When handling ESD-sensitive parts: • Keep the parts in protective packages until they are inserted into the product. • Avoid contact with other people. •...
  • Page 11 DANGER DANGER DANGER DANGER DANGER Chapter 1 Safety information...
  • Page 12 DANGER Hardware Maintenance Manual...
  • Page 13 Chapter 1 Safety information...
  • Page 14 PERIGO PERIGO PERIGO PERIGO PERIGO PERIGO Hardware Maintenance Manual...
  • Page 15 PERIGO PERIGO DANGER DANGER DANGER Chapter 1 Safety information...
  • Page 16 DANGER DANGER DANGER DANGER DANGER VORSICHT Hardware Maintenance Manual...
  • Page 17 VORSICHT VORSICHT VORSICHT VORSICHT Chapter 1 Safety information...
  • Page 18 VORSICHT VORSICHT VORSICHT Hardware Maintenance Manual...
  • Page 19 Chapter 1 Safety information...
  • Page 20 Hardware Maintenance Manual...
  • Page 21 Chapter 1 Safety information...
  • Page 22 Hardware Maintenance Manual...
  • Page 23 Chapter 1 Safety information...
  • Page 24 Hardware Maintenance Manual...

  • Page 25: Laser Compliance Statement (Multilingual Translations)

    Laser compliance statement (multilingual translations) The laser compliance statements in this section are provided in the following languages: • English • Arabic • Brazilian Portuguese • French • German • Hebrew • Japanese • Korean • Spanish • Traditional Chinese Chapter 1 Safety information...
  • Page 26 Hardware Maintenance Manual...
  • Page 27 Chapter 1 Safety information...
  • Page 28 Hardware Maintenance Manual...
  • Page 29 Chapter 1 Safety information...
  • Page 30 Hardware Maintenance Manual...
  • Page 31 Chapter 1 Safety information...
  • Page 32 Hardware Maintenance Manual...

  • Page 33: Chapter 2. Important Service Information

    After a system board is replaced, ensure that the latest BIOS is installed to the system board before completing the service action. To download software fixes, drivers, and BIOS, do the following: 1. Go to http://www.lenovo.com/support. 2. Click Download Drivers & Software. The Web site offers three options to begin your search: • Search by product number •...

  • Page 34: Strategy For Replacing A Hard Disk Drive

    Note: RoHS and non-RoHS FRU part numbers with the same fit and function are identified by the unique FRU part numbers. Lenovo plans to transit to RoHS compliance before the implementation date and expects its suppliers to be ready to meet Lenovo’s requirements and schedule in the European Union. Products sold between 2005 and 2006 might contain some RoHS compliant FRUs.

  • Page 35: Chapter 3. General Checkout

    • Damage caused by liquid spilled into the system • Damage caused by the improper insertion of a PC Card or the installation of an incompatible card • Improper disc insertion or use of an optical drive © Copyright Lenovo 2012...

  • Page 36: Power System Checkout

    3. If the voltage is not correct, replace the ac power adapter. 4. If the voltage is acceptable, do the following: • Replace the system board. • If the problem persists, go to Chapter 5 “Lenovo V480” on page 37. Hardware Maintenance Manual Voltage (V dc)

  • Page 37: Checking Operational Charging

    Note: Noise from the ac power adapter does not always indicate a defect. Checking operational charging To check whether the battery charges properly during operation, use a discharged battery pack or a battery pack that has less than 50% of the total power remaining when installed in the computer. Perform operational charging.
  • Page 38 Hardware Maintenance Manual...

  • Page 39: Chapter 4. Related Service Information

    Passwords As many as two passwords might be needed for a Lenovo notebook computer: the power-on password, the hard disk password, and the supervisor password. If any of these passwords has been set, a prompt for it will be displayed on the screen whenever the computer is turned on.

  • Page 40: Power Management

    Power management Note: Power management modes are not supported for APM operating system. To reduce power consumption, the computer has three power management modes: screen blank, sleep, and hibernation. Screen blank mode If the time set on the “Turn off monitor” timer in the operating system expires, the LCD backlight turns off. You also can turn off the LCD backlight by pressing Fn+F2.
  • Page 41 • If a “hibernation time” has been set on the timer, and if the user does not do any operation with the keyboard, the hard disk drive, the parallel connector, or the diskette drive within that time. • If the timer conditions are satisfied in suspend mode. When the power is turned on, the computer returns from hibernation mode and resumes operation.
  • Page 42 Hardware Maintenance Manual...

  • Page 43: Chapter 5. Lenovo V480

    • “Fn key combinations” on page 39 Specifications This topic lists the physical features for the Lenovo V480 models. Processor • See the system properties of your computer. You can do this as follows: Click Start, right-click Computer; then from the pull down menu select Properties.

  • Page 44: Status Indicators

    Optical drive • 12.7 mm Rambo optical drive Wireless features • Integrated wireless LAN • Integrated Bluetooth (on some models) • Integrated WiMAX • 100/1000 Mbps Ethernet communication Security features • Fingerprint reader Status indicators This chapter presents the system status indicators that show the status of the computer. Table 1.

  • Page 45: Fn Key Combinations

    Enable or disable the scroll lock function. Activate the system request. Activate the pause function. Activate the break function. Activate the insert function. Increase or decrease the display brightness level. Increase or decrease the sound volume. Chapter 5 Lenovo V480...
  • Page 46 Hardware Maintenance Manual...

  • Page 47: Chapter 6. Fru Replacement Notices

    This chapter presents notices related to removing and replacing parts. Read this chapter carefully before replacing any FRU. Screw notices Loose screws can cause a reliability problem. In the Lenovo notebook computer, this problem is addressed with special nylon-coated screws that have the following characteristics: • They maintain tight connections.
  • Page 48 Hardware Maintenance Manual...

  • Page 49: Chapter 7. Removing And Replacing A Fru

    (ESD) strap (P/N 6405959). 1010 Battery pack Removal steps of battery pack DANGER Use only the battery specified in the parts list for your computer. Any other battery could ignite or explode. © Copyright Lenovo 2012...

  • Page 50: 1020 Bottom Slot Cover

    Unlock the spring-loaded battery latch remove the battery pack in the direction shown by the arrow When installing: Install the battery pack in the slot. Make sure that the battery latches are in the locked position. 1020 Bottom slot cover For access, remove this FRU: •...
  • Page 51 Removal steps of optical drive Remove the screw Step Screw (quantity) M2 × 3 mm, flat-head, nylon-coated (1) Insert a screwdriver into the screw hole Then remove the optical drive. Removal steps of optical drive bezel and optical drive bracket Color Black and push the optical drive in the direction shown by the arrow...

  • Page 52: 1040 Memory Modules

    Remove the screws and then remove the optical drive bracket. Step Screw (quantity) M2 × 3 mm, flat-head, nylon-coated (2) 1040 Memory modules For access, remove these FRUs in order: • “1010 Battery pack” on page 43 • “1020 Bottom slot cover” on page 44 Removal steps of memory modules Release the two latches on both edges of the socket at the same time in the direction shown by the arrows , and then unplug the memory module in the direction shown by the arrow...

  • Page 53: 1050 Hard Disk Drive Assembly

    Note: If only one memory module is used on the computer you are servicing, the card must be installed in SLOT-0 ( : lower slot), but not in SLOT-1 ( When installing: Insert the notched end of the memory module into the socket. Press the memory module firmly, and pivot it until it snaps into place.

  • Page 54: 1060 Pci Express Mini Card For Wireless Lan

    Remove the hard disk drive from the slot When installing: Make sure that the hard disk drive connector is attached firmly. Removal steps of hard disk drive bracket Remove the screws Step Screw (quantity) M3 × 4 mm, flat-head, nylon-coated (4) Remove the hard disk drive bracket as shown by the arrow 1060 PCI Express Mini Card for wireless LAN For access, remove these FRUs in order:...

  • Page 55: 1070 Msata Solid State Drive

    Removal steps of PCI Express Mini Card for wireless LAN In step , disconnect the cables from the card using the removal tool antenna RF connector (P/N: 08K7159) or pick up the cables with your fingers and then gently disconnecting the cable from the card in the direction of the arrows.

  • Page 56: 1080 Backup Battery

    • Before removing the drive, have the user make a backup copy of all the information on it if possible. • Never remove the drive while the computer is operating or is in suspend mode. Removal steps of mSATA solid state drive Remove the screw Step Screw (quantity)

  • Page 57: 1090 Keyboard

    Detach the connector , and then remove the battery pack in the direction shown by the arrow When installing: Make sure that the connector is attached firmly. 1090 Keyboard For access, remove these FRUs in order: • “1010 Battery pack” on page 43 •...

  • Page 58: 1100 Keyboard Bezel

    Carefully lift the keyboard until you can see how it’s connected. Hold the keyboard above the computer, and then detach the keyboard connector. When installing: Make sure that the keyboard connector is attached firmly. 1100 Keyboard bezel For access, remove these FRUs in order: •...
  • Page 59 Removal steps of keyboard bezel Remove the screws that secure the keyboard bezel. Step Screw (quantity) M2.5 × 8 mm, flat-head, nylon-coated (11) M2 × 3 mm, flat-head, nylon-coated (3) Remove the screw Step Screw (quantity) M2 × 6 mm, flat-head, nylon-coated (1) Color Torque Black...

  • Page 60: 1120 Fingerprint Board, Led Board, And Click Pad

    Detach the connectors. When installing: Make sure that all the connectors are attached firmly. Remove the keyboard bezel. 1120 Fingerprint board, LED board, and click pad For access, remove these FRUs in order: • “1010 Battery pack” on page 43 •...
  • Page 61 • “1090 Keyboard” on page 51 • “1100 Keyboard bezel” on page 52 Removal steps of LED board Peel off the mylar tape . Then remove the LED board Chapter 7 Removing and replacing a FRU...
  • Page 62 Removal steps of click pad and click pad cable Remove the click pad cable and then push the click pad in the direction shown by the arrow Remove the click pad Hardware Maintenance Manual...

  • Page 63: 1130 Power Board

    Removal steps of fingerprint board Remove the screw and then remove the fingerprint board Step Screw (quantity) M2 × 2 mm, flat-head, nylon-coated (1) 1130 Power board For access, remove these FRUs in order: • “1010 Battery pack” on page 43 •...

  • Page 64: 1140 Microphone Assembly

    1140 Microphone assembly For access, remove these FRUs in order: • “1010 Battery pack” on page 43 • “1020 Bottom slot cover” on page 44 • “1030 Optical drive” on page 44 • “1090 Keyboard” on page 51 • “1100 Keyboard bezel” on page 52 Removal steps of microphone assembly Detach the connector , and then remove the microphone assembly in the direction shown by the arrow...
  • Page 65 Removal steps of I/O board Remove the screws , and then detach the cable. Step Screw (quantity) M2 × 6 mm, flat-head, nylon-coated (2) When installing: Make sure that the cable is attached firmly to the system board. Color Torque Black 3.0 kgfcm Chapter 7...

  • Page 66: 1160 System Board Assembly And Usb Board

    Remove the I/O board 1160 System board assembly and USB board Important notices for handling the system board: When handling the system board, bear the following in mind: • Be careful not to drop the system board on a bench top that has a hard surface, such as metal, wood, or composite. •...
  • Page 67 Removal steps of system board assembly and USB board Remove the screws , and then detach the connectors as shown in the following illustration. Step Screw (quantity) M2 × 6 mm, flat-head, nylon-coated (2) When installing: Make sure that all the connectors are attached firmly. Remove the system board in the direction shown by the arrow Color Torque...

  • Page 68: 1170 Thermal Module

    Remove the USB board as shown in the following illustration. 1170 Thermal module For access, remove these FRUs in order: • “1010 Battery pack” on page 43 • “1020 Bottom slot cover” on page 44 • “1030 Optical drive” on page 44 •...
  • Page 69 Loosen the screws , but do not remove them. Then remove the screws Step Screw (quantity) M2.5 × 5.7 mm, flat-head, nylon-coated (3) Lift the fan assembly in the direction shown by the arrow Note: Be careful not to damage the connector. Color Torque Silver...

  • Page 70: 1180 Cpu

    When installing: Before you attach the thermal module to the computer, apply thermal grease, at an amount of 0.2 grams, on the part marked application of grease can cause a thermal problem due to imperfect contact with a component. 1180 CPU For access, remove these FRUs in order: •...

  • Page 71: 1190 Lcd Unit

    Removal steps of CPU Rotate the head of the screw in the direction shown by the arrow When installing: Place the CPU above the CPU socket direction shown by the arrow 1190 LCD unit For access, remove these FRUs in order: •...
  • Page 72 Removal steps of LCD unit Release the antenna cables from the cable guides. Then remove the screws Step Screw (quantity) M2.5 × 6 mm, flat-head, nylon-coated (4) When installing: • Route the antenna cables along the cable guides. As you route the cables, make sure that they are not subjected to any tension.

  • Page 73: 1200 Speaker Assembly

    Remove the LCD unit in the direction shown by the arrow 1200 Speaker assembly For access, remove these FRUs in order: • “1010 Battery pack” on page 43 • “1020 Bottom slot cover” on page 44 • “1030 Optical drive” on page 44 •...

  • Page 74: 1210 Dc-In Sub Card And Base Cover

    Removal steps of speaker assembly Remove the screws . Then remove the speaker assembly Step Screw (quantity) M2.5 × 5.7 mm, flat-head, nylon-coated (4) 1210 DC-in sub card and base cover For access, remove these FRUs in order: • “1010 Battery pack” on page 43 •...
  • Page 75 Removal steps of DC-in sub card and base cover Remove the screws , and then remove the DC-in sub card in the direction shown by the arrow Step Screw (quantity) M2 × 3 mm, flat-head, nylon-coated (2) Color Torque Black 1.6 kgfcm Chapter 7 Removing and replacing a FRU...

  • Page 76: 2010 Lcd Front Bezel

    Applying labels to the base cover The new base cover FRU is shipped with a kit containing labels of several kinds. If the Windows Certificate of Authentication label (COA) old part with the label attached to the customer, or provide a letter to the customer stating what the label was originally on the system and what the label part number, serial number, and product key were.

  • Page 77: 2020 Integrated Camera

    • “1190 LCD unit” on page 65 Removal steps of LCD front bezel Remove the screws Step Screw (quantity) M2 × 3.5 mm, flat-head, nylon-coated (2) Remove the LCD front bezel in the direction shown by the arrows When installing: Make sure that all the latches are attached firmly. Then secure the bezel with the screws. 2020 Integrated camera For access, remove these FRUs in order: •...

  • Page 78: 2030 Lcd Panel, Lcd Cable, And Hinges

    Removal steps of integrated camera Remove the integrated camera from the LCD cover as shown in the following illustration. Note: The integrated camera is stuck on the top center of the LCD cover. When installing: Stick the integrated camera to the top center of the LCD cover and adjust the placement to make sure that the connector is attached firmly.
  • Page 79 Removal steps of LCD panel and LCD cable Remove the screws . Then remove the LCD panel in the direction shown by the arrow Step Screw (quantity) M2 × 3.5 mm, flat-head, nylon-coated (4) Remove the LCD cable. When installing: Make sure that the connector is attached firmly. Torque Color White...

  • Page 80: 2040 Antenna Assembly And Lcd Rear Cover

    Removal steps of hinges Remove the screws . Then remove the hinges Step Screw (quantity) M2 × 3.5 mm, flat-head, nylon-coated (4) 2040 Antenna assembly and LCD rear cover For access, remove these FRUs in order: • “1010 Battery pack” on page 43 •...
  • Page 81 Removal steps of antenna assembly and LCD rear cover Release the antenna cables from the cable guides of the LCD rear cover assembly and from the hinges in the direction shown by the arrows Cable routing: Route the antenna cables along the cable guides and secure the antenna boards with adhesive tapes.
  • Page 82 Hardware Maintenance Manual...

  • Page 83: Chapter 8. Locations

    Chapter 8. Locations This chapter presents the locations of the Lenovo V480 hardware components. Front view Integrated camera (on some models) Wireless module antennas Status indicators Speaker (right) Fingerprint reader (on some models) Media card reader slot : For the description of the indicators, see “Status indicators” on page 38.

  • Page 84: Right-Side View

    Battery latch (spring loaded) Security keyhole Fan louvers : The memory modules, hard disk drive, and wireless cards are located underneath the bottom slot cover. Figure 3. Lenovo V480 bottom and left-side view Hardware Maintenance Manual USB connector Power jack...

  • Page 85: Chapter 9. Parts List

    • “Miscellaneous parts” on page 88 • “ac power adapters” on page 88 • “Power cords” on page 89 Note: Each FRU is available for all types or models, unless specific types or models are specified. © Copyright Lenovo 2012...

  • Page 86: Overall

    Overall Table 3. Parts list—Overall FRU (Overall) LCD unit (see “LCD FRUs” on page 83.) LA48 Upper Case Silvery 60.4TD03.001 LA48 Upper Case Red 60.4TD21.001 LA48 LED Board W/Cable 50.4TD09.031 Hardware Maintenance Manual FRU no. 90200525 90200526 90200516...
  • Page 87 Table 3. Parts list—Overall (continued) FRU (Overall) LA48 FP Board W/Cable 55.4TD02.001G LA48 Thermal Module DIS W/FAN LA48 USB Board W/Cable 55.4TD03.001G Battery, 6CELL 2.2Ah, Sanyo 2.2Ah 48Wh 6cell battey Battery, 6CELL 2.2Ah, Sony 2.2Ah 48Wh 6cell battey Battery, 6CELL 2.2Ah, LG 2.2Ah 48Wh 6cell battey Battery, 6CELL 2.2Ah, SMP 2.2Ah 48Wh 6cell battey Battery, 6CELL 2.8Ah, SA L11S6F01 3S2P 62Wh Batt C01 Origa Battery, 6CELL 2.8Ah, LG L11L6F01 3S2P 62Wh Batt C01 Origa...
  • Page 88 Table 3. Parts list—Overall (continued) FRU (Overall) HDD, 1TB 5400rpm, WD ML500M, WD10JPVT-08A1Y HDD, 1TB 5400rpm, HGST Jaquar B, HTS541010A9E680 HDD, 320G 7200rpm, WD MX320S-1, WD3200BEKT-08PVM HDD, 320G 7200rpm, Toshiba Capricorn CS (H6sp), TSB MK3261GSY 7200PRM 9.5mm 320G HDD HDD, 320G 7200rpm, HGST Jaquar C7, HTS725032A7E630 HDD, 320G 7200rpm, Seagate Julius 1 4K, Seagate ST320LT007 7200RPM 7MM 320G HDD, 500G 7200rpm, WD MX375M, WD5000BPKT-08PK4T HDD, 500G 7200rpm, Toshiba Capricorn CS (H6sp), TSB MK5061GSY 7200PRM 9.5mm 500G HDD...

  • Page 89: Lcd Frus

    LCD FRUs In Lenovo V480 models, the type of LCD is 14-inch high definition (HD) TFT LCD (Table 4 “Parts list - LCD” on page 83). Table 4. Parts list - LCD LA48 LCD Bezel 60.4TD02.001 LA48 Hinge R+L 6K.4TDCS.001 LA48 Camera 1M56.18011.462/07.962/06.362...

  • Page 90: Keyboard

    Table 4. Parts list - LCD (continued) Panel, 14.0 HD Flat Glossy, LGD, LP140WH2-TLE2 Panel, 14.0 HD Flat Glossy, SEC, LTN140AT20-L01 Keyboard Table 5. Parts list - Keyboard (Dafon) Language Arabic Belgian Brazilian Portuguese Bulgarian French, English Czech, Slovak C& Nordics Dutch French German...
  • Page 91 Table 5. Parts list - Keyboard (Dafon) (continued) Language Portuguese Russian Slovenian Swiss Spanish Thai Traditional Chinese Turkish U.K. English U.S. English U.S. English (International, with a Euro symbol) Table 6. Parts list - Keyboard (Sunrex) Language Arabic Belgian Brazilian Portuguese Bulgarian Czech, Slovak C&...
  • Page 92 Table 6. Parts list - Keyboard (Sunrex) (continued) Language Greek Hebrew Hungarian Icelandic Indian Italian Japanese Korean Latin Portuguese Russian Swiss Spanish Slovenian Thai Traditional Chinese Turkish U.K. English U.S. English U.S. English (International, with a Euro symbol) Hardware Maintenance Manual FRU no.
  • Page 93 Table 7. Parts list - Keyboard (Chicony) Language Arabic Belgian Brazilian Portuguese Bulgarian Czech, Slovak C& Nordics Dutch French French, English German Greek Hebrew Hungarian Indian Icelandic Italian Japanese Korean Latin Portuguese Russian Slovenian Swiss FRU no. 25204296 25204386 25204304 25204394 25204297 25204387...

  • Page 94: Miscellaneous Parts

    Table 7. Parts list - Keyboard (Chicony) (continued) Language Spanish Thai Traditional Chinese Turkish U.K. English U.S. English U.S. English (International, with a Euro symbol) Miscellaneous parts Table 8. Parts list - Miscellaneous parts (a) LA48 DC-IN Brcket 33.4TD10.001 (b) LA48 DC-IN Cable 50.4TD05.001 (c) LA48 ODD Bracket 33.4TD06.001 (d) LA48 ODD Bezel Rambo 60.4TD05.001 (e) LA48 HDD Bracket 60.4TE08.001...

  • Page 95: Power Cords

    Delta ADP-90ZH DA, EPA model Chicony Power HP-BT090E13LF, EPA model Power cords A Lenovo power cord for a specific country or region is usually available only in that country or region. Table 11. Parts list - 3-pin power cords (Linetek) Country or region Argentina •...
  • Page 96 Table 11. Parts list - 3-pin power cords (Linetek) (continued) Country or region Korea • LINETEK LS15+H05VV-F+LP-E04A 1 m South Africa • LINETEK LS15+H03VV-F+PE-364 1 m Switzerland • LINETEK LS15+H03VV-F+LP-37 1 m Taiwan • LINETEK LS15+VCTF+LP-53 1 m U.K. • LINETEK LP-61L+ H03VV-F+ LS15 1 m •...
  • Page 97 Table 12. Parts list - 3-pin power cords (Longwell) (continued) Country or region South Africa • Longwell LP-39+H03VV-F+LS-18 1 Switzerland • Longwell LP-37+H03VV-F+LS-18 1 m Taiwan • Longwell LP-71+VCTF+LS-33 1 m U.K. • Longwell LP-61L+H03VV-F+LS-18 1 m • Longwell LP-30B+SPT-2 18AWG+LS-18 1 m Table 13.
  • Page 98 Table 13. Parts list - 3-pin power cords (Volex) (continued) Country or region Switzerland • VOLEX MP232+H03VV-F+VAC5S 1 m Taiwan • VOLEX TW15CS3+VCTF+VAC5S 1 m U.K. • VOLEX MP5004+H03VV-F+VAC5S 1 m • Volex US15S3+SPT-2 ＋VAC5S 1 m Table 14. Parts list - 2-pin power cords (Linetek) Country or region Africa •...

  • Page 99: Appendix A. Notices

    Lenovo representative for information on the products and services currently available in your area. Any reference to a Lenovo product, program, or service is not intended to state or imply that only that Lenovo product, program, or service may be used. Any functionally equivalent product, program, or service that does not infringe any Lenovo intellectual property right may be used instead.

  • Page 100: Electronic Emissions Notices

    Electronic emissions notices For electronic emission information on Class B digital devices, refer to the corresponding information in tPKhe User Guide. Trademarks The following terms are trademarks of Lenovo in the United States, other countries or both: Active Protection System Lenovo OneKey Windows is the trademark of the Microsoft group of companies.

Table of Contents