1140 Microphone assembly
For access, remove these FRUs in order:
•
"1010 Battery pack" on page 43
•
"1020 Bottom slot cover" on page 44
•
"1030 Optical drive" on page 44
•
"1090 Keyboard" on page 51
•
"1100 Keyboard bezel" on page 52
Removal steps of microphone assembly
Detach the connector
1
When installing: Make sure that the connector is attached firmly to the system board.
1150 I/O board
For access, remove these FRUs in order:
•
"1010 Battery pack" on page 43
•
"1020 Bottom slot cover" on page 44
•
"1030 Optical drive" on page 44
•
"1090 Keyboard" on page 51
•
"1100 Keyboard bezel" on page 52
58
Hardware Maintenance Manual
, and then remove the microphone assembly in the direction shown by the arrow
2
.