Installing Your Appliance - Brandt BIU1222SI Operating And Installation Instructions

Installing your appliance

Your appliance must be installed in compliance with the instructions given in this
"Operating and installation instructions manual" in order to keep your food under
optimum conditions and with optimal energy consumption.
- The appliance should be installed in a dry, well-ventilated room.
- Avoid balconies, verandas, and patios: the excessive heat in summer and the cold in winter could
prevent your appliance from functioning properly, or may even damage it.
- Do not place your appliance near a heat source such as an oven or radiator.
- Your appliance has been designed for optimum functioning at a certain ambient temperature; it
is designed for a particular "climate class". This climate class is clearly indicated on the identification
plate situated on the inside of your appliance, low down on the left wall. Outside of this tempera-
ture range, the performance of your appliance may be reduced.
Before placing any food in your appliance, clean it inside and out with a bicarbon-
ate of soda solution (1 dessertspoon of bicarbonate to 4 litres of water). Do not
use alcohol, scouring powder or detergents, which could damage the surfaces.
See the section on "Cleaning your Appliance".
Climate Class Ambient
temperature
N +16°C to +32°C
N-ST +16°C to +38°C
N-T +16°C to +43°C
SN +10°C to +32°C
SN-ST +10°C to +38°C
SN-T +10°C to +43°C
ST +16°C to +38°C
T +16°C to +43°C
29
EN