Detach the connector in the direction shown by the arrow
When installing: Make sure that the connector is attached firmly.
1160 Integrated camera
For access, remove these FRUs in order:
•
"1010 Battery pack" on page 38
•
"1020 Dummy card" on page 38
• "1030 Hard disk drive (HDD)/memory module/mini PCI Express Card slot compartment cover" on page 39
•
"1040 Hard disk drive" on page 39
•
"1050 Memory modules" on page 40
•
"1060 PCI Express Mini Card for wireless LAN" on page 41
•
"1070 Keyboard" on page 42
•
"1080 Keyboard bezel" on page 43
•
"1090 System board assembly" on page 47
•
"1100 LCD unit" on page 49
•
"1140 LCD front bezel" on page 56
•
"1150 LCD panel, LCD cable and hinges" on page 57
Removal steps of integrated camera
Remove the integrated camera from the LCD cover
Note: The integrated camera is stuck on the top center of the LCD cover.
When installing: Stick the integrated camera to the top center of the LCD cover and adjust the placement to
make sure the connector is attached firmly.
7
.
1
.
.
Chapter 7
Removing and replacing a FRU
59