Advertisement
Available languages
Available languages
5.. Setting. up. your. wireless. interface.. To. set. up. your. wireless. interface,. follow. the. same.
instructions. from. 3. to. 5. as. above. Configurating. Wireless. Interface. in.Access. Point. mode.
on. page. 10.. You. can. change. to.AP. or. WDS(Bridge),. Station(Client),. or. URE(Repeater).
accordingly..Click.Save&Restart.to.restart.the.wireless.router.and.activate.the.new.settings.
8) Operation Mo��es
This.chapter.gives.information.on.the.operation.modes.of.the.ASUS.WL-320gP.Access.Point.
1) Bridge Mode (WDS)
Wireless.bridge,.also.known.as.Wireless.Distribution.System.or.WDS,.allows.you.to.connect.
to. one. or. many.Access. Points.. If. you. set. the. same. SSID. among. all. access. points,. wireless.
security.level.could.be.up.to.WPA-PSK..Otherwise,.security.level.is.WEP.only.
Access Point
AP. Mode. configures. the.ASUS. 802.11g.AP. for. a. specific. purpose.. By. default,. the.ASUS.
802.11g.AP.is.set.to.serve.as.an."Access.Point".where.a.wireless.mobile.client.can.connect.
wirelessly.to.a.wired.Ethernet.network.
WDS Only
With.WDS,.the.ASUS.802.11g.AP.can.only.communicate.with.other.Access.Points.
Hybrid
Hybrid.allows.you.to.use.the.ASUS.802.11g.AP.both.as.an.access.point.and.as.a.wireless.
bridge.
Channel
Both.Access.Points.in.Wireless.Bridge.mode.must.be.set.to.the.same.channel.
WL-320gP Access Point Quick Start Guide
Advertisement
Chapters
