Toshiba RAV-GM561ATP-NZ Service Manual page 101

No. Part name
Rear cabinet 1) Perform works of items 1 of 1 and 2 , 3 .
5
2) Take off fixed screws for the bottom plate.
3) Take off fixed screw for the valve mounting
Fan motor 1) Perform works of items 1 of
6
2) Take off the flange nut fixing the fan motor
3) Remove the propeller fan.
4) Disconnect the connector for fan motor from
5) Take off the fixing screws (3 pcs.) holding by
NOTE:
Tighten the flange nut with torque 4.9Nm
(50kgf/cm).
Procedure
(ST1T Ø4 × 8L, 2 pcs.)
plate. (ST1T Ø4 × 8L, 3 pcs.)
and the propeller.
• Turning it clockwise, the flange nut can be
loosened. (To tighten the flange nut, turn
counterclockwise.)
the inverter.
hands so that the fan motor does not fall.
1 and 2 .
Flange nut
Fan
motor
- 101 -
FILE NO. SVM-18043
Remarks
Rear cabinet
Loosen the nut by
turning clockwise
Propeller fan