Advertisement
Quick Links
Advertisement
Subscribe to Our Youtube Channel
Related Manuals for Cognex CFG-8714e
Summary of Contents for Cognex CFG-8714e
- Page 1 Cognex CFG-8714e Hardware Manual 10/25/2017...
-
Page 2: Legal Notices
Copyright © 2017 Cognex Corporation. All Rights Reserved. Portions of the hardware and software provided by Cognex may be covered by one or more U.S. and foreign patents, as well as pending U.S. and foreign patents listed on the Cognex web site at: http://www.cognex.com/patents. - Page 3 Tip: Tips provide helpful suggestions and shortcuts that may not otherwise be apparent. Precautions Observe these precautions when installing the Cognex product, to reduce the risk of injury or equipment damage: To reduce the risk of damage or malfunction due to over-voltage, line noise, electrostatic discharge (ESD), power surges, or other irregularities in the power supply, route all cables and wires away from high-voltage power sources.
- Page 4 The CFG-8714e Frame Grabber The CFG-8714e Frame Grabber The CFG-8714e frame grabber is a PCI Express x4 compliant device for GigE Vision image acquisition. A CFG-8714e offers the following features: PCI Express® x4 compliant Supports 4 independent Gigabit Ethernet ports IEEE 802.3at for PoE+ (Power over Ethernet Plus) 50 to 57V, 30W per port Up to 20/61.6 PoE power supply from PCIe bus...
- Page 5 The CFG-8714e Frame Grabber Refer to the following legend for reference: A POE switch (SW3) B 4-pin 12V connector D Card ID switch (SW1) E RJ45 connectors x2 F POE LED G Trigger In connector H Temperature sensor The following diagrams present side and front views: ...
-
Page 6: Specifications
ToE, Trigger over Ethernet Power Requirements Input Voltage 3.3VDC and 12VDC, (w/ PC system power) PoE Power w/ PCIe Slot Max. 20W RJ-45 Port The CFG-8714e supports 4 GigE Vision Ethernet ports. Refer to the following table for Ethernet port connector signals:... - Page 7 The CFG-8714e Frame Grabber Signal MDI0+ (PoE_DCV+) MDI0- (PoE_DCV+) MDI1+ (PoE_DCV-) MDI2+ (PoE_DCV+) MDI2- (PoE_DCV+) MDI1- (PoE_DCV-) MDI3+ (PoE_DCV-) MDI3- (PoE_DCV-) Refer to the following table for LED1 and LED2: Activity Status LED1 10/100/1000 Off 10 Mbps Green 100 Mpbs...
-
Page 8: Status Leds
Contact your Cognex sales representative for details. See your software product documentation for more information on how your Cognex software uses a security system to ensure that the software is properly licensed. - Page 9 The CFG-8714e Frame Grabber Installing the CFG-8714e A vacant PCI express slot is required for installation. Perform the following steps to install a CFG-8714e frame grabber: 1. Remove the computer cover according to the computer manual. 2. Remove the PCE express slot cover (if any).
- Page 10 GigE Vision cameras connected to them: For additional information on using a GigE Vision camera with your Cognex vision software, see your software product documentation. In addition, the Cognex technical support site may contain additional documentation about using GigE...
- Page 11 Regulations/Conformity Regulations/Conformity Note: For the most up-to-date CE declaration and regulatory conformity information, please refer to the Cognex online support site: http://www.cognex.com/Support. Safety and Regulatory CFG-8714e: Regulatory Model 207-10006R Regulatory Model MSIP-REM-CGX-207-1031R RoHS Compliant to the latest applicable Directive.
- Page 13 October 2017...
Need help?
Do you have a question about the CFG-8714e and is the answer not in the manual?
Questions and answers