Related Manuals for Winton WRB Series
Summary of Contents for Winton WRB Series
- Page 1 WINTON BOX GRADER WRB SERIES OWNERS MANUAL PLEASE READ THIS MANUAL BEFORE OPERATING THE MACHINE...
- Page 2 This manual should be considered a permanent part of this machine and should remain with it even if the machine is subsequently sold. Winton continually seeks advancements in its product design and quality. Therefore, while this manual contains the most current product information available at the time of printing, there may be minor discrepancies between your machine and this manual.
-
Page 3: General Safety Information
Misuse: This machine is designed for use with compact tractors, and should be used only for the indicated purpose. Winton does not take responsibility if the machine is used for any other purpose. Children must not operate the machine under any circumstance. - Page 4 General Safety Information (continued) Machinery Pre-Use Checks On receipt of your new Winton machine and again within the first 4 hours of use, or the ‘shake in’ period as we like to call it, we always recommend checking over the machine.
-
Page 5: Table Of Contents
Contents General Safety information Dimensions and Specifications Set Up & Operation Adjusting Ripper Tines Changing Blades Maintenance Parts Diagram Parts List Winton Product Warranty Troubleshooting 1. DIMENSIONS & SPECIFICATIONS Model WRB4 WRB5 WRB6 190kg 250kg 310kg Weight 16hp+ 20hp+ 25hp+... -
Page 6: Set Up & Operation
2” increments. If less aggressive ripping action is desired, raise all of the tines. Getting the right set up requires experimentation and experience in your given conditions. Box scrapers generally perform better in dry to slightly damp soil conditions. Winton WRB... -
Page 7: Adjusting Ripper Tines
Move the ripper tines (3) up or down to the desired height and align the holes on the tine and body Then re-insert pin (2) in the slot and replace R clip (1) Repeat the process for the remaining tines so they are all level Winton WRB... -
Page 8: Changing Blades
Knock out the roll/stretch pins 2 with a punch or remove bolts and nuts if bolts are used. Remove old blade tip 3 and insert the new blade. Replace roll/stretch pins and knock in to place or replace bolt and nut if preferred. Winton WRB... -
Page 9: Maintenance
Inspect scraper for loose, damaged or worn parts and adjust or replace if needed. *The periods recommended are based on normal operating conditions. Severe or unusual conditions may require more frequent maintenance. Winton WRB... -
Page 10: Parts Diagram
6. PARTS DIAGRAM TS 2020 Winton WRB... -
Page 11: Parts List
6BS.00.107 Lower linkage pin GB93-22 Lock washer M22 GB6170- M22x1.5 Nut M22 6BS.00.103 A frame bracket 6BS.00.106 Steel collar GB5782- M16x110 Bolt M16 6BS.00.103 Supporting bracket GB5783- M16x50 Bolt M16 GB/T879.1-2000 Slotted spring pin 10x35 4/ 5/ 6 Winton WRB... -
Page 12: Winton Product Warranty
We always strive to create great products, but when something does go wrong we have a strong network of resellers on hand throughout the UK to help out. Warranty Claims Before you get in touch here are 5 pieces of information your Winton reseller will need to progress your claim: •... -
Page 13: Troubleshooting
Reduce the working speed of tractor Tine Tips/ Blades Ground may be too hard, await rain fall and re-attempt Breaking Off Check the tine tips/blades are secured prior to starting Always consult your Winton dealer if you have any questions about your machine. Winton WRB... - Page 14 NOTES Winton WRB...
- Page 15 Winton WRB...
- Page 16 www.wintonmachinery.co.uk...
Need help?
Do you have a question about the WRB Series and is the answer not in the manual?
Questions and answers