Comfast CF-XR186 Quick Installation Manual page 3

Relay installation steps
2
2.1. Plug in the power supply, wait for 1-2 minutes, and connect to WiFi
"COMFAST_XXXX_2G" or "COMFAST_XXXX_5G"
2.2. Click the WiFi signal "COMFAST_XXXX_2G" or "COMFAST_XXXX-
_5G" to pop up the login interface, enter the password "admin" in the
password box, and click "Set Password".
COMFAST XXXX
- _2G
COMFAST XXXX
- _2G
Tip: When logging in for the first time, the login interface will pop up
automatically.There are two cases when there is no login interface:
First, the mobile phone itself does not support pop-up windows; Second,
once set, once again enter the interface, you need to manually,Manual
entry method: Open the mobile phone browser, enter "192.168.10.1" in
the address bar.
3.4、After setting the password for the first time, it will automatically enter
the repeater scanning page. Set the trunk then choose SSID of the
repeater, enter the upper routing password and click Save to complete the
repeater, reconnect to the wireless network to access the Internet, the
wireless password is the superior routing password (the expanded signal
will be in the superior Add "-2G / 5G" suffix such as XXXX-2G / 5G after
the WiFi name.
10:03 10:03
192.168.10.1
English
admin
Set Passwor d