Lenovo IdeaCentre K200 User Manual page 10

Hide thumbs Also See for IdeaCentre K200:
Table of Contents

Advertisement

——— Chassis Side Lock: After installing the side panel of the chassis,
——— Audio Line-in Connector: To connect audio input to the computer.
— Audio Line-out Connector: To connect to the speakers or
———— Microphone Jack: To connect to audio input from a microphone.
———— Used to attach your computer to a telephone line for modem use.
——— Used to attach a telephone line to your computer. (some models
—— Voltage: selection switch (Some models are equipped with this
Check the position of the voltage-selection switch on the rear of the computer. Use
a ballpoint pen to slide the switch, if necessary.
1. If the voltage supply range is 100-127 V ac, set the switch to 115 V.
2. If the voltage supply range is 200-240 V ac, set the switch to 230 V.
31032754_IdeaCentre K UG_EN.indd 5
push the lock upward to lock the side panel in place. To remove the
side panel, depress the lock first.
headphones.
(some models equipped with this connector)
equipped with this connector)
switch)
Figure 1
Figure 2
5
User Guide
2007.11.30 5:56:36 PM

Advertisement

Table of Contents
loading

This manual is also suitable for:

Ideacenter k

Table of Contents