Advertisement
Quick Links
67-2500CB
IF your ReadyLIFT
product has a damaged or missing
®
part, please contact customer service directly and
a new replacement part will be sent to you immediately.
For warranty issues, please return to the place of
installation and contact ReadyLIFT.
(877) 759-9991
MON-FRI 7AM-4PM PST
OR
EMAIL: support@readylift-ami.COM
WEBSITE: ReadyLIFT.COM
**Please retain this document in your vehicle at all times.**
Limited Lifetime Warranty
This unique product warranty proves our commitment to the quality and reliability of every product that
ReadyLIFT manufactures. The ReadyLIFT product warranty only extends to the original purchaser of any
ReadyLIFT product, if it breaks, we will give you a new part. Warranty does not apply to discontinued parts.
Our Limited Lifetime Warranty excludes the following ReadyLIFT items; bushings, bump stops, ball joints, tie
rod ends, heim joints and shock absorbers. These parts are subject to wear and are not considered defective
when worn. They are warranted for 12 months from the date of purchase for defects in workmanship.
This product warranty is voided if the vehicle is not aligned after kit installation and proper maintenance is
routinely done.
Product purchased directly from ReadyLIFT has a 90 day return policy on uninstalled products from the date
of purchase (may be subject to restocking fee). Uninstalled product returns must be in the original Ready-
LIFT packaging. Please call (877) 759-9991 to get an RGA# for any return. Customer is responsible for
shipping costs back to ReadyLIFT. Returns without RGA# will be refused. Contact ReadyLIFT directly
about any potentially defective parts prior to removal from vehicle.
ReadyLIFT products are NOT intended for off-road abuse. Any damage or failure as a result from off-road
abuse voids the warranty of the ReadyLIFT product. ReadyLIFT is NOT responsible for any subsequent dam-
ages to any related vehicle parts due to misuse, abuse, improper installation, or lack of maintenance. Fur-
thermore, ReadyLIFT reserves the right to change, modify or cancel this warranty without prior notice.
www.ReadyLIFT.com - Phone: (877) 759-9991
67-2500CB-IM-AA
Advertisement
Related Manuals for ReadyLift 67-2500CB
Summary of Contents for ReadyLift 67-2500CB
- Page 1 ReadyLIFT manufactures. The ReadyLIFT product warranty only extends to the original purchaser of any ReadyLIFT product, if it breaks, we will give you a new part. Warranty does not apply to discontinued parts. Our Limited Lifetime Warranty excludes the following ReadyLIFT items; bushings, bump stops, ball joints, tie rod ends, heim joints and shock absorbers.
- Page 2 Failure to drive safely may result in serious injury or death to driver and passengers. Driver and passengers must ALWAYS wear your seat belts, avoid quick sharp turns and other sudden maneu- vers. ReadyLIFT Suspension does not recommend the combined use of suspension lifts, body lifts, or other lifting devices.
-
Page 3: Important Note
45mph or damage to dif- ferentials may occur. A lifted vehicle may have different headlight aim performance. ReadyLIFT recom- mends marking and recording the headlight beam position before kit installation and then adjusting, if necessary, the headlamps to the same height settings after kit in- stallation. - Page 4 By re- cording and not exceeding the fender to hub center that ReadyLIFT call out will en- sure the lift on your vehicle is correct. This measurements and components will effect the completion of this lift kit.
-
Page 5: Bill Of Materials
Professional knowledge and skill will typically yield the best installation results. If you need an installer in your area, please contact ReadyLIFT Suspension Customer Service to find one of our “Pro- Grade” Dealers. - Page 6 ***Parts shown in red for picture clarification only*** ReadyLIFT recommends all steps and procedures described in these instructions be performed while the vehicle is properly supported on a two post vehicle lift with safe- ty jacks. Otherwise, park vehicle on a clean flat surface and block the rear wheels for safety.
- Page 7 Be careful not to damage factory coating on knuckle. 6. Install ReadyLIFT 68-2500CB caster bushing by inserting into around factory ball joint stud and sliding into the hole previously occupied by factory caster slug.
- Page 8 9. Re-install wheel and torque lug nuts to factory recommended torque. 10. Repeat steps 2-9 on passenger side of vehicle. 11. Measure vehicle for new alignment specifications and record in table on page www.ReadyLIFT.com - Phone: (877) 759-9991 67-2500CB-IM-AA...
- Page 9 RECOMMENDED ALIGNMENT SPECS Driver Passenger Tolerance Total / Split Camber -0.3 -0.3 +/- 0.5 +0.0 Caster +3.0 +3.0 +/- 0.5 +0.0 +.07 +.07 +/-0.05 +.14 www.ReadyLIFT.com - Phone: (877) 759-9991 67-2500CB-IM-AA...
Need help?
Do you have a question about the 67-2500CB and is the answer not in the manual?
Questions and answers