Download Print this page

Advertisement

Quick Links

IF your ReadyLIFT
part, please contact customer service directly and
a new replacement part will be sent to you immediately.
For warranty issues, please return to the place of
**Please retain this document in your vehicle at all times.**
This unique "no hassle" product warranty proves out commitment to the quality of every product the
ReadyLIFT produces. ReadyLIFT product warranty only extends to the Original Purchaser of any
ReadyLIFT product. If it breaks, we will give you a new part.
Any ReadyLIFT products containing missing or defective components will be covered under warranty by
ReadyLIFT. Please call 800-549-4620 to initiate a warranty claim. Rest assured out customer service
team will urgently address the matter and expedite the replacement parts. In the event of a defective
product, ReadyLIFT may request a return of the defective product (at ReadyLIFT's expense) so the
quality team can analyze the nature of the defect. Returning defective product will not delay the
replacement part delivery.
ReadyLIFT leveling kit, block kits, and lift kit products are NOT intended for off-road abuse. Any abuse or
damage as a result of off-road use voids the warranty of the ReadyLIFT product. Exception: ReadyLIFT
Jeep SST and Terrain Flex Lift Kits are designed for normal off-road use to compliment the Jeep vehicle's
off-road capability. All Jeep Lift Kit products are covered under warranty when used in recreational
off-road environments.
Warranty does not apply to discontinued, clearance or outlet products. Wearable components including
but not limited to, shocks, ball joints, heim joints, bushings, and steering extensions, are covered for up
to 1-year. Labor, installation, surcharges or any other applicable fees from the original purchase are non-
refundable. ReadyLIFT is not responsible for any consequential damage to the vehicles.
ReadyLIFT reserves the right to change, modify, or cancel this warranty without prior notice.
69-41200-IM-AA
69-41200 2" 2021-UP Nissan Rogue Lift Kit
product has a damaged or missing
®
installation and contact ReadyLIFT.
(877) 759-9991
MON-FRI 7AM-4PM PST
EMAIL: support@readylift-ami.COM
WEBSITE: ReadyLIFT.COM
READYLIFT " NO HASSLE" PRODUCT WARRANTY
READYLIFT "NO HASSLE" WARRANTY PROCEDURES
www.ReadyLIFT.com - Phone: (877) 759-9991
OR

Advertisement

loading
Need help?

Need help?

Do you have a question about the 69-41200 and is the answer not in the manual?

Questions and answers

Summary of Contents for ReadyLift 69-41200

  • Page 1 Returning defective product will not delay the replacement part delivery. ReadyLIFT leveling kit, block kits, and lift kit products are NOT intended for off-road abuse. Any abuse or damage as a result of off-road use voids the warranty of the ReadyLIFT product. Exception: ReadyLIFT Jeep SST and Terrain Flex Lift Kits are designed for normal off-road use to compliment the Jeep vehicle’s...
  • Page 2 Failure to drive safely may result in serious injury or death to driver and passengers. Driver and passengers must ALWAYS wear your seat belts, avoid quick sharp turns and other sudden maneuvers. ReadyLIFT Suspension does not recommend the combined use of suspension lifts, body lifts, or other lifting devices.
  • Page 3 Always measure the vehicle ride height prior to beginning installation. A lifted vehicle may have different headlight aim performance. ReadyLIFT recommends marking and recording the headlight beam position before kit installation and then adjusting, if necessary, the headlamps to the same height settings after kit installation.
  • Page 4 PRE-INSTALLATION MEASUREMENTS: It is imperative that you record the following measurements and factory components in the tables below. ReadyLIFT tests and records as much data from each application as available at the time of product development. Vehicle manufacturers may change components or add models with different options.
  • Page 5: Bill Of Materials

    Professional knowledge and skill will typically yield the best installation results. If you need an installer in your area, please contact ReadyLIFT Suspension Customer Service to find one of our “Pro-Grade” Dealers.
  • Page 6 ***Parts shown in red for picture clarification only*** ReadyLIFT recommends all steps and procedures described in these instructions be performed while the vehicle is properly supported on a two post vehicle lift with safety jacks. Otherwise, park vehicle on a clean flat surface and block the rear wheels for safety with the parking brake engaged.
  • Page 7 Gently lift up on cowling from the engine bay side, while lifting pull towards the front of the vehicle to disengage from the windshield. Once disengaged from the windshield, set aside in the engine bay. www.ReadyLIFT.com - Phone: (877) 759-9991 69-41200-IM-AA...
  • Page 8 Use of a pry bar may be needed for placement of the strut spacer. The top hat can be rotated to access the bolts. Once all have been started, tighten all down. www.ReadyLIFT.com - Phone: (877) 759-9991 69-41200-IM-AA...
  • Page 9 M12 nuts, bolts, and washers. Torque to 30 ft-lbs. Install the factory sway bar end link to the bracket using the factory hardware. Torque to 30 ft-lbs. www.ReadyLIFT.com - Phone: (877) 759-9991 69-41200-IM-AA...
  • Page 10 Re-install the driver side molding clip making sure that all the moldings are lined up before doing so. Re-install both wiper blade arms in the your marked location. Torque to 10 ft-lbs. www.ReadyLIFT.com - Phone: (877) 759-9991 69-41200-IM-AA...
  • Page 11 Make sure the rear of the car is jacked up and on proper support stands. Remove the rear wheels and begin the rear installation. Make sure the rear lower control arm supported. Loosen and remove the factory hardware. Retain factory hardware. www.ReadyLIFT.com - Phone: (877) 759-9991 69-41200-IM-AA...
  • Page 12 Lower the jack and let the control arm swing down while supporting the spring assembly. When you have enough room, place the provided spring spacer into the factory isolator. The assembly should now look like the picture. www.ReadyLIFT.com - Phone: (877) 759-9991 69-41200-IM-AA...
  • Page 13 Torque the lug nuts to the wheel manufacturer’s specs. Once on a level surface with the wheels chocked, loosen more bolts shown in the picture to allow the suspension to settle properly. www.ReadyLIFT.com - Phone: (877) 759-9991 69-41200-IM-AA...
  • Page 14 Torque lower shock bolts to 65 ft-lbs. Torque trailing arm bolts to 75 ft-lbs. Repeat process on opposite side. Final torque of the cam bolts to be set by the alignment tech during the alignment. www.ReadyLIFT.com - Phone: (877) 759-9991 69-41200-IM-AA...
  • Page 15 RECOMMENDED ALIGNMENT SPECS Front Driver Passenger Tolerance Total / Split +0.06 +0.06 +/-0.05 +0.12 Rear Driver Passenger Tolerance Total / Split Camber -0.05 -0.05 +/-0.05 -0.1 +0.18 +0.18 +/-0.05 +0.36 www.ReadyLIFT.com - Phone: (877) 759-9991 69-41200-IM-AA...