Trouble-Shooting Guide; Specification - Panasonic NI-GSG060 Operating Instructions Manual

TROUBLE-SHOOTING GUIDE

Problem Causes
The power plug has not been plugged in or the
power button has not been pressed down.
Condensate water that produced from steam
The product
remains in the hose.
produces no steam
or irregular steam.
The water reservoir is empty.
The water reservoir and hose is not be installed
correctly to the power base.
The cap is loose.
Water leaks out
from the Power
base
The hose is bend.
The telescopic
pole slips down The garment on the hook is too heavy.
unexpectedly
The product
produces a The hose forms a U-shape.
water noise.
If you can not solve your problem according to the above solutions.
Have your product repaired by the specified service agent.
12
Solution
Insert the power plug and be sure to press
the Power button.
Lift up the steamer head vertically and straighten
the Hose, to make condensate water backflow.
Fill the water reservoir with water.
Attach the water reservoir and hose to the power
base correctly.
Close the cap correctly .
Straighten the hose.
Lighten the weight loaded to the fixing hook
(less than 2 kg).
Do not bend the hose.

SPECIFICATION

Model NI-GSG060
Rated voltage 220-240 V 50-60 Hz
Power 1 680-2 000 W
Weight Approx. 2.8 kg
Dimensions
(WxDxH) Approx. 28.6 x 28.6 x 169 cm
(assembly)
Single-phase three core plug /
Plug / Cord length
Approx. 1.5 m
Corded steam hose
Approx. 1.2 m
length
Water reservoir
Approx. 1.5 L
capacity
This product is intended for household use only.
13