Advertisement
Properties
» Brightness control of 230 V light sources, including dimmable
LED
lighting up to 180 W
1
» Ability to connect a local momentary push button to switch
the light on and off (short press) and to control the brightness
(long press);
» Setting a given brightness level using the mobile application
and programmable timers;
» Built-in clock with power backup and backup copy of the work
program guarantees proper operation also without a Wi-Fi
connection;
» REST API support enabling integration of the controller also
with other home automation systems;
» Built-in thermal protection;
» Convenient installation in an installation box with a diameter
of �60 mm.
1 A prerequisite for proper opera� on is the connec� on of dimmable light sources. Make
sure that the packaging or instruc� ons for the light source clearly state that the bright-
ness can be adjusted. It is o� en represented by one of the following symbols:
Dimmable light source
Due to the large variety of dimmable LED lamps, it may happen, in rare cases, that the
selected lamp will not work properly with the Wi-DIM1S1-P dimmer. Typical symptoms
in such a case include low brightness adjustment range and fl ickering of the light. There-
fore, it is advisable to carry out a test before installing the dimmer.
2 Indica� ve value. The limit level of the power depends on the design and quality of the
connected light sources and in reality may be signifi cantly lower than the specifi ed va-
lue.
;
2
No brightness adjustment
- 2 -
Advertisement
