Charging The Battery - SPC FLOW 7 Quick Manual

CHARGING THE BATTERY

The device has an internal battery. You have to charge it
before starting to use it, connecting the device to a charger
of 5V/1.5A (not included) or connecting it to computer´s
USB. With the device switched off, connect one end of the
USB cable in the battery charger and the other end to the
device's connector (6). The battery will start to be charging.
Charge the battery during around 6 hours to ensure a
maximum usage time and to lengthen its useful life.
NOTE: If the battery is TOO discharged, it's possible that the device
needs some minutes to start charging. If you don't see anything
in the dsiplay it's possible that it is too discharged. Wait some
minutes until the charging process starts. Do not forget to charge
the device before the first use and when the battery icon is empty.
26