Whirlpool WDT720PADM User Instructions page 12

EZ-2-Lift™ Top Rack Adjuster (on some models)
You can raise or lower the top rack to fit
tall items in either the top or bottom
rack. Adjusters are located on each
side of the top rack.
To raise or lower the rack with
adjuster 1
Hold the top rack with one hand near
the adjuster and use the other hand to
pull out the top of the adjuster. Raise or
lower the rack to one of the preset
positions.
To raise the rack with adjuster 2
Lift and pull up.
To lower the rack
Lift up and let down.
NOTE: The top rack must
be level.
Removable Top Rack
The removable top rack allows you to wash larger items such as
pots, roasters, and cookie sheets in the bottom rack.
IMPORTANT: Remove dishes prior to removing the top rack from
dishwasher.
To remove the rack
1. To gain access to the
track stops, pull the
upper rack forward
about halfway out of the
tub.
2. To open, flip the track
stop toward the outside
of the tub.
3. After opening both track
stops, pull top rack out
of the rails.
4. Close track stops and
slide the tracks back into
the dishwasher.
To replace the rack
1. Gently pull tracks forward in dishwasher until they stop. Open
track stops.
2. Place the back wheels on each side of the rack into the track
slot and roll them back into the tracks, but do not push the
rack all the way into the tub.
3. Insert front rack wheels on each side of the rack into the track
slots.
4. Slide rack into the dishwasher. The stops will automatically
close when rack enters dishwasher.
11