Appendix A. Cru Instructions; Replacing The Battery - Lenovo B460 User Manual

B460 User Guide V1.0_en.book Page 30 Thursday, March 25, 2010 2:06 PM

Appendix A. CRU instructions

Replacing the battery

Note: Use only the battery provided by Lenovo. Any other battery could ignite or explode.
To replace the battery, do the following:
1 Turn off the computer, or enter hibernation mode. Disconnect the AC
adapter and all cables from the computer.
Note: If you are using an ExpressCard device, the computer might not be able to enter
hibernation mode. If this happens, turn off the computer.
2 Close the computer display, and turn the computer over.
3 Unlock the battery latches in the unlocked position
battery pack in the direction shown by the arrow
4 Install a fully charged battery.
5 Slide the manual battery latch to the locked position.
6 Turn the computer over again. Connect the AC adapter and the cables to
the computer again.
30
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
a
b
a
, remove the
b .
a