Removing And Re-Installing The Storage Drawer - Samsung NE59M9430 Series User Manual

Fig. 2
How to re-install the door
Hinge arm
Bottom
edge of
slot
Indentation
1. Firmly grasp both sides of the door at the top.
2. With the door at the same angle as the removal position, slide the indentation
of the hinge arm into the bottom edge of the hinge slot. The notch in the
hinge arm must be fully inserted into the bottom of the slot.
5. Lift door up and out until the hinge arm
is clear of the slot (Fig. 2).
Unlocked position
3. Open the door fully. If the door will not open fully, the indentation is not
inserted correctly in the bottom edge of the slot.
4. Push the hinge locks up against the front frame of the oven cavity to the
locked position.
5. Close the oven door.

Removing and re-installing the storage drawer

Hook Hook
Hinge lock
Locked position
How to remove the storage drawer
Pull the drawer out until it stops.
1.
2. Tilt the front of the drawer and pull out
it until it stops.
3. Lift and pull the drawer out.
How to re-install the storage drawer
1. Put the left side of the drawer over the
left hook and the right side over the
right hook.
2. Push the drawer until it stops.
3. Tilt and lift the drawer.
4. Push the drawer in.
English 41