Cafe CDT800 Series Owner's Manual page 15

Hide thumbs Also See for CDT800 Series:
Table of Contents

Advertisement

Available languages

Available languages

Loading
A loaded upper rack may be heavier than anticipated. To prevent minor injury or damage to
CAUTION
the contents, do not raise or lower the upper rack after the rack is loaded.
On some models, the upper rack allows 2" of adjustment up
or down to accommodate larger items. The upper rack may
be lowered by pushing the long flaps on each side of the rack.
This will allow you to lower the rack. To raise the rack, lift up
on the rack until the rack locks in place.
On some models, the upper rack may be adjusted to
accommodate larger items. To adjust the upper rack, fully
extend the upper rack and lift the front of the rack so that the
rack roller wheels clear the end hooks on the front of the rails.
Continue to pull the rack until the remaining rack roller wheels
clear the end hook. Select the set of rollers on the side of the
rack that provides the desired height, and reinstall the upper
rack by aligning the rack roller wheels on the end hook and
rack rails – Ensure that there are roller wheels above and
below the rack rails. Failure to properly align the wheels onto
the end hook and rails may result in the rack falling from the
dishwasher.
To add flexibility in loading, the stem safe shelf (on some
models) may be placed in the up or down position or
unfolded and placed in the lower unfolded position.
The shelf may also be used to secure stemware such as
wine glasses. Because these stemware items come in
various sizes, slowly push the rack in to ensure the items
do not bump into the edges of the dishwasher, which
may cause damage to the items.
The fold down tines (on some models) provide flexibility
for extra-large and hard-to-fit items. The tine rows can be
adjusted to a vertical or lay-down position.
14
Upper Rack
Rail
Rack Rollers
Place the
slots in the
utility shelf
clips over
the vertical
rack wires
and push
down to attach
utility shelf
onto second
wire of rack
Upper
Rail End Hook
Rack
Pull rack out,
lift up and over
rail end hooks,
and pull out to
Rail
remove
End
Hook
49-4000271 Rev 1

Advertisement

Table of Contents
loading

Table of Contents