Maintenance Instruction - Matco Tools MT2422 Manual

MAINTENANCE INSTRUCTION:

1.) LUBRICATION:
Before connection of the hose, apply 4 to 5 drops of a
good quality air tool oil at the air inlet. After 3 to 4 hours
of operation, oiling may be necessary again.
2.) TIGHTNESS OF PARTS:
Regularly check whether all connection parts are
fastened securely. Follow this procedure daily before
beginning work.
3.) STORAGE:
Avoid storing the tool in a location subject to high
humidity. If the tool is left unused, the residual moisture
inside the tool can cause rust. Before storing and after
operation, oil the tool at the air inlet with a good quality
air tool oil and run it for a short period.
4.) DISPOSAL:
Follow national legislation of waste disposal.
5.) ORDERING SERVICE PARTS:
For further operational and handling information or
for replacement of parts and components, contact
your Matco Tools Distributor. When ordering parts
and components, give each part number, name and
quantities.
MICRO SURFACE
PREP TOOL
1) The tool shall not be used in potentially explosive
atmospheres.
2) Disconnect the air hose before changing or adjusting any
inserted tools.
3) Before using tool, please confirm all couplings and plugs
are fixed securely. An air hose that is under pressure may
lash out when disconnected and could lead to serious
injuries.
4) Prevent loose clothes, long hair or any other personal
accessories from coming close to moving parts to reduce
the risk of being caught, trapped or drawn into the mixer.
5) Excessive high air pressure that exceeds the maximum
pressure may cause injuries to user.
6) Exposure to strong vibration for extended time may cause
harm to operator.
7) WATCH YOUR STEP! Leaving excess hose unattended near
working area or walk path could result in injury or death.
8) Wearing eye/face protection could reduce the danger to
person from high speed splinters being emitted from
the tool or work surface.
9) Wearing correct breathing protection will help avoid
inhaling dust or debris from work process that can be
harmful to your health.
10) High sound levels can cause permanent hearing loss.
Use hearing protection while operating tool.
11) Dust and paint particles created from the mixing process
may expose the user to dust and/or microscopic particles
that may contain chemicals known to the State of
California to cause cancer, birth defects or other
reproductive harm.
Page 2
MT2422
WARNING
1604071-14MA