Lenovo IdeaPad S10-2 User Manual page 55

Chapter 4. OneKey Rescue System
Restore of factory default
In order to save application files and the initial backed up files of the
system, the hard disk in a Lenovo PC includes a hidden partition when it is
shipped. If you need to restore the system to the point of your first boot up,
just enter the Lenovo OneKey Rescue System and run Restore to factory
default. This will delete all the new data on the system partition
(C partition), which is not recoverable. Make sure to back up any critical
data before you run this feature.
Restore from backup
If you want to recover the system to a previous status, you just need to
enter Lenovo OneKey Rescue, and select Restore from user's backup.
Select the appropriate image file or, if you have run incremental backup
before, you can use the incremental file to restore your system.
The process above will remove all data on the current system partition
(C partition), which is not recoverable. Please back up any important data
before restoring to a previous backup.
Using
recovery discs
When you replace a hard disk drive in your computer, you will be unable
to use the pre-installed Lenovo OneKey Recovery and OneKey Rescue
System. However, you can use the recovery discs that store your backed up
data to restore your new hard drive to a previous backup status.
When you use the recovery discs to boot your computer, the system will
enter the system recovery user interface automatically. Please follow the
40