LG FH U1 BS Series Service Manual page 14

How to use washer
Delay ( )
You can set a time delay so that the washing
machine will start automatically and finish
after a specified time interval.
NOTE
• The delay time is the time to the end
of the programme, not the start.
The actual running time may vary
due to water temperature, wash load
and other factors.
1. Touch the Power button.
2. Select a cycle.
3. Touch the Time Delay button and set time
required.
4. Touch the Start/Pause button.
Wash ( )
• Turbo Wash (
) :
Wash the laundries in 1 hour with energy
and water saving.
• Intensive (
) : If the laundry is normal
and heavily soiled, "Intensive" option is
effective.
Temp.
• By touching the Temp. button the water
temperature can be selected.
- Cold
- 20°C, 30°C, 40°C, 60°C, 95°C
• Water temperature can be selected
according to the program.
Rinse ( )
• Rinse plus (
) : Add rinse once.
• Rinse Hold (
) : The course is paused
until start button is touched again when
rinse is finished.
Spin
• Spin Speed level can be selected by
touching 'Spin' button repeatedly.
• Spin Only
1. Touch the Power button.
2. Touch the Spin button to select RPM.
3. Touch the Start/Pause.
NOTE
When you select "No Spin", it will still
rotate for a short time with low speed to
drain quickly.