Using On-Screen Display (OSD) controls
To adjust the settings, the user controls can be viewed through the OSD�
To use the controls:
1� Press
to open the main OSD menu�
2� Use
or
to move among the icons� Select an icon and press
there is a sub-menu, you can move between options using
Use
or
to make adjustments then press
3� Press
to move backwards through the sub-menus and exit from the OSD�
4� Enables DDC/CI by default� Use OSD Exit Key, Press and hold
enable DDC/CI function� A message "DDC/CI disable" is shown on the screen�
L24m-40
Brightness
Contrast
Basic Settings
DCR
Display mode
Color Settings
Scaling Mode
Port Settings
Over Drive
Volume
Menu Settings
Mute
Input Signal:HDMI
Resolution : 1920*1080
to save�
Refresh Rate : 100Hz
to access the selected function� If
or , then press
for 10 seconds to disable/
Chapter 2� Adjusting and Using your monitor 2-4
to select that function�