Advertisement
ASSEMBLY AND SET -UP
Collar Clamp
Using a 5 mm Allen wrench, check that the collar clamp bolt is tightened securely. This item is tightened
and quality inspected at the factory, but there is a slight chance that the effects of shipping or handling
may have caused the bolt to loosen.
3
Need Help? Visit our web site for replacement parts, product support, a list of authorized service centers in the US and customer service contact information
at www.razor.com. Please have the product I.D. code (located on the white label of your product) available for better assistance. Additional Customer Service
contact information is listed at the back of this manual.
1
4
5
2
WARNING: Failure to
properly install and tighten the
collar clamp may cause the rider
to lose control and fall. If you are
having difficulty understanding
these instructions, please
contact Razor Customer Service
for assistance.
Advertisement
