Table of Contents
Advertisement
Available languages
Available languages
Features
LED floodlight for wall lighting
Equipped with 12x 1 W LED, 3200 K
•
Perfect as wall lighting for shop windows, booth lighting at trade exhibitions, etc.
•
Inclination-angle of the device head: horizontal approx 320°, vertical approx 85°
•
Unique design
•
Ready for connection with power cord and safety power plug
•
Available in 3 housing colors: silver, black, white
•
Connection with the mains
Connect the device to the mains with the power-plug.
The occupation of the connection-cables is as follows:
Cable
Pin
Brown
Live
Blue
Neutral
Yellow/Green
Earth
The earth has to be connected!
If the device will be directly connected with the local power supply network, a disconnection switch with a
minimum opening of 3 mm at every pole has to be included in the permanent electrical installation.
The device must only be connected with an electric installation carried out in compliance with the IEC-
standards. The electric installation must be equipped with a Residual Current Device (RCD) with a maximum
fault current of 30 mA.
Lighting effects must not be connected to dimming-packs.
OPERATION
Install the device at the desired installation spot using the screw.
After you connected the effect to the mains, the KKL-12 starts running.
CLEANING AND MAINTENANCE
We recommend a frequent cleaning of the device. Please use a soft lint-free and moistened cloth. Never use
alcohol or solvents!
There are no serviceable parts inside the device except for the lamp. Maintenance and service operations
are only to be carried out by authorized dealers.
Should you need any spare parts, please use genuine parts.
Should you have further questions, please contact your dealer.
International
L
N
DANGER TO LIFE!
Disconnect from mains before starting maintenance operation!
10/12
00107488.DOC, Version 1.0
Advertisement
Table of Contents
