Overheating Safety Device - HOMCOM YH-20 Assembly Instruction

given supervision or instruction concerning the use of the appliance,
understanding the hazards involved. Small children must not plug in, regulate,
clean or maintain this appliance.
20. CAUTION – Some parts of this product can become very hot and cause burns.
Particular attention must be given when children and vulnerable people are
present.
21. This product is fitted with a thermostatic room temperature control.
22. Hyperthermia can result in death. Symptoms of hyperthermia include high body
temperature, headache, nausea, vomiting, tiredness, dizziness, fainting, and
rapid pulse. If you begin to experience symptoms related to hyperthermia, turn off
the heater and seek medical attention.
23. To avoid excessive room temperatures which can cause hyperthermia: DO NOT leave
product running unattended in a confined space around infants, or individuals with
reduced physical, sensory, or mental capabilities.
Lay stove upside down on a padded surface to avoid scratches to the surface of your stove.
Line up holes in the leg with holes in the underside of the stove body. With the use of the
screwdriver secure leg with the screws provided (3 screws per leg) as shown in the figure below.
1.Flame switch - Switches flame effect and power on/off.
2.Heating setting: please press "
3.Heating setting : please press"
first press " ")

Overheating safety device

If the heater stops working, turn it off and check if the inlet or outlet is blocked. Unplug the unit and
wait at least 10 minutes, so the protection system can reset. If the heater still does not work,
contact customer service for inspection or repair.
Before restarting the heater, ensure it has been unplugged for at least 10 minutes.
" for 750W.
"and " " at the same time for 1500W (can not operate without
3
WARNING: Do not use this heater with
missing, damaged, or broken legs.