Remove The Usb Board Cable - Lenovo Yoga 7 Hardware Maintenance Manual

Figure 20. Disconnect the fan cable, loosen four screws in alphabetical order from the heat sink, remove two
screws from the fan, and remove the thermal module
Screw specifications
M2.0 × L6.0
Go to
https://support.lenovo.com/partslookup
replacement parts:
Thermal module
Thermal mylar

Remove the USB board cable

Make sure the following FRUs (or CRUs) have been removed.
"Remove the lower case" on page 28
Step 1. Disconnect the battery pack cable from the system board.
Attention: Use your fingernail to pull the connector to unplug it. Do not pull the cable.
38
Yoga 7 (14", 7) and Yoga 7i (14", 7) Hardware Maintenance Manual
Number of screws
2
to look up the Lenovo part numbers of the following