Canon WFT-E6 Instruction Manual page 32

Connecting to a Detected Network Manually
Entering the Access Point Encryption Key
Enter the encryption key (password) specified for the access point.

For details on the specified encryption key, refer to the access
point's instruction manual.
The screens displayed in steps 2 to 4 below vary depending on the

authentication and encryption specified for the access point.
Go to page 34 when the [IP address set.] screen is displayed

instead of the screens for steps 2 to 4.
32
Select a key index.
2
The [Key index] screen is displayed

only if WEP encryption is used by the
access point.
Select the key index number

specified for the access point, then
press <0>.
Select [OK] and press <0> to go to

the next screen.
Select the format and the number
3
of characters used for the key.
Select [OK] and press <0> to go to

the next screen.