Connecting The Cd Player; Analog Connection; Top Tips - JBL CD350 Classic Owner's Manual

Connecting the CD player

Analog Connection

Step 1, ensure power is disconnected from the CD player and amplifier.
Step 2, using analog interconnect cables, connect the right (R), red terminal of the analog output on the
CD player to the right (R), usually red terminal of the CD input on your amplifier.
Step 3, connect the left (L), white terminal of the analog output on the CD player to the left (L), usually
white terminal of the CD input on your amplifier.

Top Tips

▪
After making connections: switch the amplifier on with no input and reduce the volume to minimum.
Select the CD input, and then slowly increase the volume to a suitable listening level whilst playing
a CD. This technique will avoid loud sounds or product damage in the event of incorrect
connection.
▪
If you are unsure as to how your system should be connected, please contact your JBL dealer who
will be happy to help you.
Pg 8 JBL CD350 Classic Owner's Manual EN