IKEA VILLKORLIG Manual page 9

EN
Display window
This LED screen displays the minutes
remaining in a running cycle, hours of
delay before the unit is set to start, error
codes, etc.
• If the machine is in operation,
the remaining time (mins) of the
selected cycle will be shown in the
display window.
• If the Delay option is selected, the
number of hours of delay (1h-24h)
will be shown in the display window.
After the machine starts, the
remaining time of the selected cycle
will be shown in minutes on the
display window.
NOTE
The remaining time could suddenly
increase or drop several minutes. This
means the Smart Sensor has checked
the soil level and adjusted the number
of fill cycles.
• If an error occurs which is critical
to the machines function and safe
operation, the control shall shut
down and indicate an error code in
the display window.
(See Error Codes).
Cycle Chart
CYCLE OPTIONS AVAILABLE
AUTO Heat Dry
Sanitize,
HEAVY Hi Temp, or
Heat Dry
Sanitize,
NORMAL
Hi Temp, or
Heat Dry
FAST Heat Dry
RINSE
Heat Dry
CONTROLS & SETTINGS
If Error codes are displayed, contact
the dealer or qualified service center.
They will available to provide assistance
in trouble shooting the problem and/or
locate and authorized service technician
if needed.
Cycle progress indicator
The cycle progress
indicator lights will
illuminate as each stage
of the wash cycle is
reached.
WASHING
When the dishwasher is washing the
load, the Washing light will illuminate.
DRYING
When the dishwasher is at drying stage,
the Drying light will illuminate.
CLEAN
After the cycle has ended, the Clean light
will illuminate until the dishwasher door
has been opened.
SANITIZED
When Sanitize is selected, the Sanitized
light will illuminate after the cycle has
ended.
WATER
USAGE
2.5–4.9 gal.
9.5–18.5 liters
4.9 gal.
18.5 liters
2.5–4.9 gal.
9.5–18.5 liters
3.3 gal.
12.5 liters
1.8 gal.
6.7 liters
CYCLE TIME
120–155 mins.
155–160 mins.
125–160 mins.
60–100 mins.
20–55 mins.
9