Frigidaire FFHN2750TS Use & Care Manual page 17

CONTROLS - NON-DISPENSER MODELS
IMPORTANT
Pressing the system on/off icon does not turn off power to your refrigerator.
You must unplug the power cord from the wall outlet.
An indicator light will be illuminated above most active features.
Touch the icon to activate the options below.
quick freeze
quick ice
water filter
air filter
C/F
alert reset
default
settings
power
Setting cooling temperatures
Press the ^ or v indicator to adjust the temperature to the desired
setting.
The temperature setting will begin to blink with the first touch. The
display will time out after 10 seconds and return to the basic display.
NOTE
The recommended settings for a product installed in a kitchen is
37˚F for the fresh food compartment and 0˚F for the freezer.
Activates a faster rate for freezing food.
Temporarily increases cooling for freezer to increase
the production of ice
Press and hold for three seconds to reset after filter
change.
Filter condition status is always displayed when door
is open. Press and hold for three seconds to reset
after filter change.
Touch to toggle display from Fahrenheit to Celsius.
Tones emitted by each key press can be turned off
based on user preference. The sounds are muted
when the red indicator is lit. Warning signals will
stay active.
Resets all refrigerator settings such as temp, temp
display and tones to their factory default settings.
Press and hold for three seconds to turn off the
cooling system to clean the refrigerator. The digital
displays will read OFF.
17