Table of Contents
Advertisement
The KP260d has an integrated MP3
player built-in. You can enjoy listening
to MP3 music files on your phone
using a compatible headset or via the
internal loudspeaker.
Note
Because of the small dimension
of the speaker, in some cases the
audio could be distorted, especially
at maximum volume and when
there are lots of bass sounds.
Therefore, we recommend you to
use the stereo headset in order to
appreciate the high quality of your
music.
The music player supports:
• MPEG-2 Layer III, MPEG-2.5
Layer III: Sampling frequency up
from 8KHz to 48KHz. Bit rate up to
320Kbps, stereo.
• AAC: ADIF, ADTS formats (Sampling
frequency from 8KHz to 48KHz)
• AAC+: V1: (Bit rate 16~128Kbps)
V2 : (Bit rate 16~48Kbps)
(Sampling frequency from
8KHz to 48KHz)
MP3 player [Menu 0]
Note
KP260d doesn't support the variable
bit rate of all mentioned file types.
Therefore, you can't change the file
from MP3 format to AAC.
You can transfer MP3 files from a
compatible PC to the memory in your
phone using the Mass Storage.
When you connect the phone to a
PC using the USB cable the phone
appears as a removable disk through
windows explorer. When you go to
disconnect the phone please eject the
phone safely before disconnecting
the USB cable.
Note
►
You should copy MP3 to Sounds/
MP3 folder. If you copy another
folder, you can't see MP3 files.
►
The PC should run Windows 98
SE, Windows ME, Windows 2000,
Windows XP operating system.
►
In case that any invalid file is
included in the playlist, an error
message will pop up and take you
go back to the prior screen.
63
Advertisement
Table of Contents
