Table of Contents
Advertisement
en AutoPilot
12 AutoPilot
The "AutoPilot" operating mode helps you to use your
appliance to prepare different dishes by selecting the
optimum settings automatically.
12.1 Cookware
The cooking result depends on the composition of the
meat and the size of cookware.
You should therefore use heat-resistant cookware that
is suitable for temperatures up to 300 °C. Glass or
glass ceramic cookware is best. The joint should cover
approx. two thirds of the cookware base.
Cookware made from the following material is not
suitable:
¡ Bright, shiny aluminium
¡ Unglazed clay
¡ Plastic or plastic handles
Note: For some dishes, the appliance switches on the
microwave. A notification appears in the display stating
that you should use cookware that is suitable for mi-
crowave use.
→ "Cookware and accessories with microwave",
Page 15
12.2 Settings for the dishes
To make the dishes perfectly, the appliance uses differ-
ent settings.
Note: The cooking result depends on the quality and
composition of the food. Use fresh and, ideally, chilled
food.
Information on the settings
Once you start a dish, the display shows relevant
information for this dish, e.g.:
¡ Suitable shelf position
¡ Suitable accessory or cookware
¡ Added liquid
¡ Time for turning or stirring
When this time is reached, a signal sounds.
Programmes
The ideal type of heating, temperature and cooking
time are preset for programmes.
In order to obtain an optimal cooking result, you must
also set the weight. Unless otherwise indicated, set the
total weight for your dish. You can set the weight only
in the intended range.
Microwave dishes
The appliance activates the microwave automatically
for certain dishes. This significantly reduces the cook-
ing time.
Take note of the information for the microwave.
→ "Microwave", Page 15
12.3 Overview of the dishes
You can see which individual dishes are available to
you here.
Meals
¡ Pizza with thin base, x 1
¡ Lasagne
18
¡ Chicken, unstuffed
¡ Chicken pieces
¡ Meat loaf made from fresh mince
¡ Steaming fish fillet
¡ Vegetables, fresh
¡ Vegetables, frozen
¡ Baked potatoes, whole
¡ Boiled potatoes
¡ Long-grain rice
¡ Defrosting poultry pieces
¡ Defrosting meat
¡ Defrosting fish fillet
12.4 Adjusting the dish
Note: Once it has started, you can no longer change or
interrupt the dish and the settings.
Requirement: To start the operation, the cooking com-
partment must be cooled down.
Press
.
1.
Use the control ring to set the required dish.
2.
Press
.
3.
Turn the control ring to set the weight of your dish.
4.
The cooking time is calculated automatically.
For some dishes, you can also delay the end
‒
time.
→ "Setting the end time", Page 15
Press to start.
5.
a The appliance starts to heat and the cooking time
counts down. The heating line does not appear.
a Once the dish is ready, a signal sounds. The appli-
ance stops heating.
When the cooking time has elapsed:
6.
To stop the signal early, press any touch field.
‒
For some dishes, you can continue cooking if ne-
‒
cessary.
→ "Adding extra cooking time", Page 18
When the dish is ready, press
‒
pliance off.
Adding extra cooking time
For some dishes, the appliance offers the option to add
extra cooking time once the cooking time has elapsed.
You can do this as often as required.
If you do not want to continue cooking, press
1.
switch off the appliance using
To continue cooking the dish, press .
2.
a A cooking time appears in the display.
Use the control ring to change the cooking time, if
3.
required.
Press to start.
4.
a The appliance starts to heat and the cooking time
counts down.
a When the time has elapsed, a signal sounds. The
appliance stops heating. The notification to continue
cooking appears again.
When the cooking time has elapsed:
5.
To stop the signal early, press any touch field.
‒
If you want to continue cooking again, press .
‒
When the dish is ready, press
‒
switch the appliance off.
to switch the ap-
and
.
and use
to
Advertisement
Table of Contents
