Advertisement
5. Remove the MD after check. (Recording check)
Recording check
6. Connect the portable CD player (or any player with an optical
digital output terminal) with the unit (CD side of the optical digital
input terminal). (Refer to Fig.7.)
7. Set the recordable MD.
8. Press the REC button. The REC LED (red color) blinks. (Refer to
Fig.6.)
9. Play back the CD and press the
(Refer to Fig.6.)
10. Press the
11. Play back the MD and check if the MD is recorded.
12. Remove the MD after check.
13. Turns off the power, and remove the lead wire between the no. 8
pin (TP77) of IC10 and GND (TP74). (Refer to "Power Supply to
This Unit alone.")
button. (UTOC will be written.) (Refer to Fig.6.)
button. The recording starts.
Fig.6
Fig.7
Advertisement
