Advertisement
9.3. How to Check Play/Rec. Signal to This Unit alone
Necessary instruments:
- Recorded MD
- Recordable MD
- Optical cable
- Portable CD player and CD
(You can check this operation with any player that has an optical digital output terminal other
than the portable CD player. The following procedure explains check operation with the
portable CD player, but the procedure is the same for the other players.)
Procedure:
1. Set the unit so that "Power Supply to This Unit alone" as
previously explained.
2. Preparing of PLAY/REC. check.
Playback check
3. Set the recorded MD in the unit.
4. Press the
in Fig.6, when the
button and check if the MD play backs. (As shown
button is pressed, the LED turns green.)
Fig.5
Advertisement
