Table of Contents
Advertisement
Steps
1. Connect the antenna cables to the WLAN card.
The following table provides the antenna-cable color scheme for the WLAN card of your computer.
Table 2. Antenna-cable color scheme
Connectors on the wireless card
Main (white triangle)
Auxiliary (black triangle)
2. Place the WLAN card bracket to secure the WLAN antenna cables.
3. Insert the WLAN card into the connector on the system board.
4. Replace the (M2x3.5) screw to secure the plastic tab to the WLAN card.
Next steps
1. Install the
powered
GPU.
NOTE:
This step is required only if the system is configured with powered GPU.
2. Install the
fan
duct.
3. Install the
side
cover.
4. Follow the procedure in
44
Disassembly and reassembly
after working inside your
Antenna-cable color
White
Black
computer.
Advertisement
Table of Contents
