Chapter 3 Frequently Asked Questions; Frequently Asked Question - Supero BMC IPMI User Manual

Frequently Asked Questions
3-1 Frequently Asked Questions
A. Questions: How do I fl ash the IPMI fi rmware?
Answer:
1. Log onto the web interface page of the IPMIcfg utility by typing the IP address
of the system.
2. Click the Maintenance button. Browse to choose the correct fi le to fl ash the
fi rmware.
3. Click the "Update Firmware" button to proceed with fi rmware fl ashing.
B. Questions: How do I set up the IP address and MAC address for remote
access?
Answer:
1. Boot the system into DOS.
2. Run the utility-IPMICFG from DOS.
3. Follow the prompts to set up the IP address and MAC address for remote
access.
You can also go to the BIOS to confi gure the IP address.
Chapter 3
3-1
Chapter 3: Troubleshooting