Using The Bios Settings To Set The Ip/Mac Addresses; Accessing The Bmc - Supero BMC IPMI User Manual

Embedded BMC IPMI User's Guide
-fd
-ver
-vlan
-vlan on (VLANtag)
-vlan off
-raw

Using the BIOS Settings to set the IP/MAC Addresses

1. Go to the BIOS by pressing the <Del> key during system boot.
2. Select IPMI from the Advanced Menu.
3. Select LAN Confi guration from the IPMI submenu.
4. Click on the item - IP Address Source. Select the option Static and hit <En-
ter>. The onboard BIOS will automatically set the IP Address, MAC Address,
Gateway, and Subnet Mask.
5. Once the IP, MAC Addresses, Gateway and Subnet Mask are set, click on the
item Update LAN Settings. Select Yes and hit <Enter> to update IPMI LAN
settings.
6. Go to the Exit menu. Select Save Changes & Exit and hit <Enter> to save
changes and exit the BIOS.

Accessing the BMC

1. Connect a LAN cable to the onboard LAN1 port or the dedicated IPMI LAN
port.
2. Choose a computer that is connected to the same network and open the
IPMIView utility.
3. Go to File>New>System. Enter System Name, IP Address of LAN1 or the
dedicated LAN, Description in the appropriate fi elds and press <Enter>.
4. Select the system from the IPMI Domain. Enter the Login ID and Password in
the appropriate fi elds to log-in to the IPMIView utility.
Resets to the factory defaults
Gets the fi rmware revision
Gets VLAN status
Enables the VLAN and sets the VLAN tag (If VLAN
tag is not given, it uses previously saved value.)
Disables the VLAN
Sends a RAW IPMI request and print the re-
sponse. Format: NetFn LUN Cmd [Data1...Data]
2-2