Subscribe to Our Youtube Channel
Related Manuals for UTEK UT-6502 Series
Summary of Contents for UTEK UT-6502 Series
- Page 1 Your Reliable Partner in Industrial IoT UT-6502 Series TCP/IP (100M fiber) to 2-port CANBUS protocol converter User Manual UTEK TECHNOLOGY...
-
Page 2: Indicator Light
Your Reliable Partner in Industrial IoT 1. Overview UT-6502 series is a high-performance CAN-bus communication converter integrating 2 CAN interfaces and 1 Ethernet (fiber optic) interface. The converter supports 10M/100M Ethernet network and 5Kbps~1Mbps communication rate CAN-bus interconnection, which further extends the application range of CAN-bus and network.UT-6502 converter provides Web configuration interface, users can flexibly set the operation parameters of UT-6502 converter. -
Page 3: Key Definition
Reset: button, press for 3 seconds to reboot the system, press for 5 seconds to restore the factory settings of the device 5. Pin Definition 5.1 Power supply pin definition Definition Description Power input positive Power input ground PGND 5.2 Label silkscreen 5.2.1 Ethernet interface UTEK TECHNOLOGY... - Page 4 Receiving signal negative 4，5，7，8 5.4 Terminal pin definition 3.81-4pin Phoenix terminal PIN No. PIN name Description PIN name Description CAN1-H signal CAN2-H signal CAN1-H CAN2-H connection terminal connection terminal CAN1-L signal CAN2-L signal CAN1-L CAN2-L connection terminal connection terminal UTEK TECHNOLOGY...
- Page 5 13-byte aligned serial data frame is not standard, the 13-byte segment will not be converted and the subsequent data will be converted. If you find that some CAN messages are missing after conversion, check that the 13-byte serial data format of the corresponding message does not conform to the standard format. UTEK TECHNOLOGY...
- Page 6 As above for extended frame ID numbers As above for standard frame ID numbers Representation of 0x12345678 Representation of 0x3FF Frame data: 8 bytes in length, valid length is determined by the value of D3 to D0 of the frame information. DATA1 DATA8 UTEK TECHNOLOGY...
- Page 7 7.3 CAN frame format is divided into extended frames and standard frame 7.3.1 Extended frame ID length: 29 bits; standard frame size: 11 bits; here both extended and standard frames are in 32-bit mode 7.3.2 Example: iii. Extension frame At this point ID=0x0000003A<0X1FFFFFFF,match iv. Standard frame UTEK TECHNOLOGY...
- Page 8 IP as the module IP and port number 5001 UDP Client mode: (Note: Configure the network port udp server before this mode configuration) Module Port No. 5001 Remote Device Port No. 5005 UTEK TECHNOLOGY...
- Page 9 When transmitting in transparent mode. Sender's command: 8a 00 00 00 00 3b 11 22 33 44 55 66 77 88 99 10 Display on the receiving end: 11 22 33 44 55 66 77 88 99 10 UTEK TECHNOLOGY...
- Page 10 8. Web Operation Instructions 8.1 Login screen The default username and password are admin 8.2 Main interface Here you can view the current device parameters, including device name, version, network parameters and CAN port parameter UTEK TECHNOLOGY...
- Page 11 Remote server IP address IP address of the remote server to which the device needs to connect as a client Remote device port No. The remote server port number to which the device needs to connect as a UTEK TECHNOLOGY...
- Page 12 The generated filter ID ranges between the start frame and end frame (including the set start frame and end frame IDs), and can be set by multiple groups simultaneously to take effect. 8.3.3 TCP Status UTEK TECHNOLOGY...
- Page 13 Display connection status Tx, Rx Current CAN port transmit and receive data count 8.4 CAN2 port parameters configuration CAN2 port setting method is the same as CAN1 port, see CAN1 port setting instructions for details. 8.5 IP Configuration UTEK TECHNOLOGY...
- Page 14 8.6 Firmware Upgrade Here, you can upgrade the firmware of your device. When you need to upgrade your device, please use the official upgrade package to upgrade; click Select File > Import File > Click Upgrade. 8.7 Equipment Management UTEK TECHNOLOGY...
- Page 15 100M Fiber optic CAN Interface UT-6502 UT-6502SM-SC 1 SC Interface (single mode) UT-6502SM-FC 1 FC Interface (single mode) UT-6502SM-ST 1 ST Interface (single mode) UT-6502MM-SC 1 SC Interface (multi-mode) UT-6502MM-FC 1 FC Interface (multi-mode) UT-6502MM-ST 1 ST Interface (multi-mode) UTEK TECHNOLOGY...
Need help?
Do you have a question about the UT-6502 Series and is the answer not in the manual?
Questions and answers