Related Manuals for UTEK UT-8812
Summary of Contents for UTEK UT-8812
- Page 1 Model:UT-8812 USB/RS-232 Commercial interface converter Instruction Manual http://www.iolines2u.com...
-
Page 2: Table Of Contents
【Contents】 1. Overview …………………………………………………………………………..…..3 2. Main Features ……………………………………………………………………..….3 3. Hardware installation and application………………………….……………….…..3 4. Performance parameters ………………………………………………………...…4 5. Connector and signals ………………………………………………………………4 6. Product dimension and connection diagram………………………………….…...5 7. Fault and trouble-shooting ……………………………………………………….…6 8. driver installation procedure………………………………………………….….6-13 http://www.iolines2u.com... -
Page 3: Overview
RS-232 interface, so the USB to RS-232 converters are needed to transfer data between PC and RS-232 devices. UT-8812 is a universal USB 2 port RS-232 converter which doesn’t need external power supply and is compatible with USB and RS-232 standards. It can convert single-end USB signal to RS-232 signal, and it has built-in automatic transmit-receive switch without time delay. -
Page 4: Connector And Signals
13、Cable length: 1500mm ℃ ℃，relative humidity of 5% to 95% 14、Working environment: -40 to 85 15、 Supported OS： Support Windows2000/XP， Vista， server2003， Mac OS-X/OS9， LINUX， Windows7, Server 2008, and 64-bit。 Ⅴ. Connector and signals 1）Pin assignment of RS-232C DB9M(PIN) RS-232C Protective earth Receive data SIN(RXD) Transmit data SOUT(TXD) -
Page 5: Fault And Trouble-Shooting
1. Standard USB A-type male connector 2. Filter magnetic ring 3. Screened black standard USB2.0 cable 4. Aesthetic shell (black) 5. Standard DB9 male connector 6. Master chip of FTDT company in England USB to RS-232 Communication 1、DCD 2、RXD 3、TXD 4、DTR 5、GND 6、DSR 7、RTS 8、CTS 9、RI RS-232 Device RS-232 Device Ⅶ. -
Page 6: Driver Installation Procedure
Ⅷ. Driver installation procedure Following dialogue will pop up automatically when the UT-8812 is connected to PC. Please select [install from list or specified location (For advanced user)] and click “Next”. The following dialogue of path selection will be shown, and please select [Don’t search. I’ll select the driver to be installed by myself (D)] and click “Next”. - Page 7 Then the hardware type dialogue will be shown and please scroll to (Universal serial bus controller) and click “Next”. The dialogue of “select the driver to be installed for this hardware” will be shown and please click [install from hard disk (H)] http://www.iolines2u.com...
- Page 8 Then the dialogue of “install form hard disk” will be shown and please click (browse) to select the path of driver. The dialogue of “Find files” will pop up, and then select the CD path. Select (USB 2.0 TO Rs232 Cable) and open or just double click it as shown in the following figure.
- Page 9 Select the appopriate operating system (such as windows xp), and select (win2000 xp64 server2003 2008x64 Vista x64 win7 x64) and click to open it or double click it. In the popped up dialogue select FTDIBUS.INF and click it to open it, then a new dialogue with selected FTDIBUS file will be shown.
- Page 10 Below is the driver path and then please click (OK). The system has found the hardware installation information of the USB Serial Converter as shown in the figure below, then click “Next”. http://www.iolines2u.com...
- Page 11 The USB Serial Converter installation wizard is completed just as shown in the following figure. Then the system will detect the USB Serial Port automatically and show the “New hardware found" wizard. The following dialogue shows the new hardware wizard of USB Serial Port. Please click “Next” and the following steps are just the same as the wizard of USB Serial Converter, so we won’t describe it in detail here.
- Page 12 The system has found the hardware installation information of the USB Serial Port as shown in the figure below, then click “Next”. The USB Serial Port installation wizard is completed just as shown in the following figure. Now the driver of UT-8812 has been installed completely. http://www.iolines2u.com...
- Page 13 COM port. If it’s the first time to install the USB driver on this system then the default COM ports are COM3 and COM4 as shown in the following figure. Up to now the driver of UT-8812 has been installed successfully. http://www.iolines2u.com...