Related Manuals for Kallipr Captis Pulse Lite
Summary of Contents for Kallipr Captis Pulse Lite
- Page 1 Installation Guide - Captis Pulse Lite Version 1.0 Installation Guide Captis Pulse Lite For further assistance, please contact support@kallipr.com...
- Page 2 An internet-connected device, such as a phone or tablet What’s in your Captis device box? • Captis Pulse Lite • Mounting bracket • Activation magnet • Amphenol Connector + Pins + Glands Handle With Care For further assistance, please contact support@kallipr.com...
- Page 3 Terminate the Sensor Your Captis Pulse Lite is provided with a four-pin Amphenol plug that can be connected to one or two sensors and/or measurement devices. For additional information, refer to the Captis Termination guide.
- Page 4 Do not remove pins from the Amphenol plug once terminated. Please contact Kallipr for further support • Ensure there is no debris between the plug and the Captis Pulse Lite prior to connecting. Test the Sensor When the sensor has been terminated into the provided Amphenol plug, it is recommended that the sensor itself is tested prior to connection with the Captis device.
- Page 5 No cellular signal troubleshooting for a flashing Cellular LED. if issue Contact support persists. For further support, please contact your Kallipr distributor. For any additional enquiries please contact the Kallipr Support Team at support@kallipr.com. For further assistance, please contact support@kallipr.com...
Need help?
Do you have a question about the Captis Pulse Lite and is the answer not in the manual?
Questions and answers