Sumitomo CCW-72 Manual To Operation

CCW-72
Guide to operation
How to use the CCW-72
The CCW-72 is designed to protect fusion splicers.
Always store and transport the machine in its case.
Storage box
Cleaver case
【Upper】
· If you carry the case while fiber scraps are in the dust bin, they may fall
into the case, causing risk of injury. Empty the bin before closing the case
for transport.
· Place your tools on an appropriate location on the tray before closing the
case. Failure to do so can damage the inner foam.
· Do not apply excessive force to the lid of the case or carry the case by the
handle or shoulder belt while the case is open. Items may fall out of the
case, causing splicer to malfunction or personal injury.
· Hold the tray handle when storing the tray in the case, to avoid trapping
your fingers.
· Transport the CCW-72 with the tool box in front of the splicer. Failure to do
so may damage the splicer.
· Remove the tool box before removing the fusion splicer.
Dust bin
Tool box Fusion splicer
Battery
Handle
Storage space
< 1 >
Compartment for
fiber holders
【Lower】