Table of Contents
Advertisement
T erminating the programme
T e r m i n a t i n g t h e p r o g r a m m e
(Reset)
1. Press START button P for
approx. 3 sec.
The numerical display h
indicates ‹:‹‚.
2. The programme sequence lasts
display h is indicated ‹:‹‹.
approx. 1 min. On the digital
3. Switch off ON/OFF switch (.
Changing the programme
When the START button P has been
pressed, the programme cannot be
changed.
The only way a programme can be
changed is by Cancel programme
(Reset).
Intensive drying
The final rinse uses a higher
temperature which improves the drying
result. The running time may increase
slightly. (Caution if utensils are delicate!)
1. Close the door.
2. Switch on ON/OFF switch (.
3. Hold down programme button #
and press START button P until
the digital display h š:‹... is
indicated.
4. Release both buttons.
To change the setting:
1. Press the button 3 to switch the
Intensive drying on š:‹‚ or off š:‹‹.
2. Press START button P.
The set value is saved.
Cleaning and maintenance
2
Cleaning and
maintenance
C le a n i n g a n d m a i n t e n a n c e
A regular inspection and maintenance
of your machine will help to prevent
faults. This saves time and prevents
problems.
Overall condition
of the machine
Check spray arm for grease
■
and limescale deposits.
If you find such deposits:
Fill detergent dispenser with
■
detergent. Start the appliance without
utensils in the programme with
the highest rinsing temperature.
Clean the appliance with detergents/
appliance cleaners which
are particularly suitable for use with
dishwashers.
To extend the life of your appliance,
■
clean the appliance regularly with a
special dishwasher detergent.
To ensure that the door seal always
■
remains clean and hygienic, regularly
clean it with a damp cloth and a little
washing-up liquid.
If the appliance is switched off for
■
a prolonged period, leave the door
ajar to prevent the formation of
an unpleasant odour.
aus
23
Advertisement
Table of Contents
