Table of Contents
Advertisement
INSERTING WIRE SHELVES AND OTHER ACCESSORIES IN THE OVEN
1.
Insert the wire shelf horizontally, with the raised part "A" upwards (Fig. 1).
2.
The other accessories, like the drip tray and baking tray, are inserted with the raised part on the flat
section "B" facing upwards (Fig. 2).
Fig. 1
Fig. 2
CONTROL PANEL DESCRIPTION
3
4
1.
FUNCTION SELECTOR KNOB: On/off and function selector knob
2.
THERMOSTAT KNOB: selecting the temperature
3.
CONTROL KNOB FOR FRONT LEFT HOTPLATE
4.
CONTROL KNOB FOR REAR LEFT HOTPLATE
5.
CONTROL KNOB FOR REAR RIGHT HOTPLATE
6.
CONTROL KNOB FOR FRONT RIGHT HOTPLATE
N.B.: the knobs are retractable. Press the knobs in the middle and they pop up.
7.
ELECTRONIC PROGRAMMER
8.
THERMOSTAT LED
*
The - symbol on the cooktop control knobs indicates that there are no corresponding functions, and therefore, in that
position, the cooking zone switches off.
OVEN OPERATION
•
Turn the selector knob to the required function.
The oven light switches on.
•
Turn the thermostat knob clockwise to the required temperature.
The thermostat led lights up, switching off again when the oven reaches the selected temperature.
At the end of cooking, turn the knobs to "0".
COOKTOP OPERATION
The oven control panel features 4 adjustable knobs for cooktop operation. They are marked with a
numerical scale corresponding to different power settings (0...9).
•
Turn the control knob of the relevant hotplate clockwise to the desired power setting (see the
instructions supplied with the cooktop).
°
1
7
8
2
5
6
0 1 2...9 - (*)
0 1 2...9 - (*)
0 1 2...9 - (*)
0 1 2...9 - (*)
EN25
Advertisement
Table of Contents
