Table of Contents
Advertisement
Connecting to a WLAN and configuring network settings
Manually setting the IP address
By entering the IP address, you can connect to a WLAN via an AP
(access point) in the wireless network service area.
1
Press the [Home (
)] button
2
Touch the Wi-Fi setting (
The camcorder automatically searches for available AP devices.
•
3
Touch the
tab next to an AP.
4
Touch IP Setting
Manual.
IP Setting
IP
0. 0. 0. 0
Subnet Mask
0. 0. 0. 0
Gateway
0. 0. 0. 0
DNS Server
0. 0. 0. 0
touch Social Sharing.
) tab.
Wireless network (HMX-QF20 only)
5
Touch each submenu item and then enter the required value
using the virtual keyboard.
Item
Description
IP
Enter the static IP address.
Subnet Mask
Enter the subnet mask.
Gateway
Enter the gateway.
DNS Server
Enter the DNS address.
6
Touch the
tab.
The camcorder connects to the network via the selected AP.
•
•
For more information about the network settings, contact the network
administrator or the service provider.
•
The network settings may differ, depending on network conditions.
•
Do not try to connect to a network that you have no permission to
access.
•
Use a fully charged battery while you are using network services.
74
page 75
Advertisement
Table of Contents
