Poulan Pro PR675Y22RHP Operator's Manual page 6

"QUICK RELEASE" HANDLES
(ALL OTHER MODELS)
• Raise lower handle section to mowing
position and align holes in lower handle
with holes in handle brackets.
• Insert handle bolts through lower
handles and handle brackets; secure
with lower ("standard") knobs.
• Remove protective padding, raise up-
per handle section into place on lower
handle and tighten both upper ("quick-
adjust") knobs.
Operator
presence
control bar
LIFT
UP
LIFT
UP
2 POSITION / "ADJUSTABLE" HANDLES
• Raise handles until lower handle section
locks into place in mowing position.
Operator
presence
control bar
LIFT
UP
LIFT
UP
ASSEMBLY
MOWING
POSITION
Upper
handle
Upper handle
knob ("quick-
adjust")
Lower handle
Lower handle knob
("standard")
MOWING
POSITION
Upper
handle
Handle
knob
Lower handle
3 POSITION "EZ" HANDLES
• Raise lower handle section to operating
position and align hole in handle with
one of three height positioning holes.
• Insert handle bolt through handle and
bracket and secure with knob.
• Repeat for opposite side of handle.
Knob
3 POSITION "QUICK" HANDLES
• Raise lower handle section to operating
position and squeeze the bottom ends
of lower handle towards each other
until the pin in handle can be inserted
into one of the three height adjustment
holes.
SQUEEZE
Handle
ad just ment
bracket
ALL HANDLES
• Raise upper handle section into place
on lower han dle, remove protective pad-
ding and tighten both handle knobs.
• Remove handle padding holding operator
pres ence control bar to upper handle.
• Your lawn mower handle can be ad-
justed for your mowing comfort. Refer
to "ADJUST HANDLE" in the Service
and Adjustments section of this manual.
NOTE: For shipping purposes, the rear
wheels on your lawn mower may not be
adjusted to the same position as the front
wheels. Before operating mower adjust all
wheels to the same cutting height.
6
Bolt
Handle
bracket
Handle pin